MDE SAC12

MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
SAC SERIES
LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE- 5.0 TO 50 Volts
500 Watt Peak Pulse Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
• Glass passivated junction
• 500W Peak Pulse Power
capability on 10/1000 µs waveform
• Glass passivated junction
• Low incremental surge resistance
• Excellent clamping capability
• Repetition rate (duty cycle): 0.01%
• Fast response time: typically less than
1.0 ns from 0 volts to V(BV)
• Ideal for data line applications
• High temperature soldering guaranteed:
265°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-15 Molded plastic over glass passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.015 ounces, 0.4 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
PPPM
Minimum 500
waveform (NOTE 1, Fig.1)
IPPM
SEE TABLE 1
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
Steady State Power Dissipation at T L = 75°C
PM (AV)
3.0
Lead lengths .375", 9.5mm
-55 +175
Operatings and Storage Temperature Range
TJ, TSTG
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
Certified RoHS Compliant
UL File # E223026
UNITS
Watts
Amps
Watts
°C
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
RATINGS AND CHARACTERISTIC CURVES SAC SERIES
TA=25℃ unless otherwise noted
100
Pig.1 - Peak Pulse Power Rating Curve
Average Power
Percentage of Rated Power(%)
IPPM-Peak Pulse Power (kW)
Fig.2-Power Derating Curve
100
Non-repetitive Pulse
Waveform shown in Fig. 3
30
TA=25°C
10
Impulse
Exponential
Decay
PPK".5"
1
td
PPK
td
Half Sine
td=7tp
PPK
Square
td
Current Waveforms
0.1
0.1s
1.0s
87.5
75
Peak Power
(single pulse)
62.5
50
37.5
25
12.5
0
10s
100s
1.0ms
10ms
td - Pulse Width (sec.)
0
25
50
75
100
125
150
TL Lead Temperature (°C)
Fig.3 - Pulse Waveform
Fig. 4 - AC Line Protection Application
150
TJ = 25°C
IPPM - Peak Pulse Current,%
I
tr = 10µsec.
Pulse Width (t d)
Peak Value
IPPM
100
is defined as the point
where the peak current
decays to 50% of I PPM
Low Capacitance
TVS
Half Value- I PPM
2
50
10/1000µsec.Waveform
as defined by R.E.A.
td
0
0
1.0
3.0
2.0
t - Time(ms)
3.0
4.0
4.0
Application Note: Device must be used
with two units in parallel,opposite in polarity
as shown in circuit for AC signal line
protection.
175
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
500 Watt Low Capacitance TVS
PART
NUMBER
SAC5.0
SAC6.0
SAC7.0
SAC8.0
SAC8.5
SAC10
SAC12
SAC15
SAC18
SAC22
SAC26
SAC30
SAC36
SAC45
SAC50
WORKING
INVERSE
REVERSE
INVERSE MAXIMUM
BREAKDOWN MAXIMUM
PEAK REVERSE BLOCKING
STANDOF
JUNCTION BLOCKING CLAMPING PULSE LEAKAGE LEAKAGE
VOLTAGE
F
CAPACITANC VOLTAGE VOLTAGE CURRENT @ VRWM CURRENT
VBR (V)
VOLTAGE
E @ 0 VOLTS
VWIB
@Ipp=5.0A Ipp (A)
MIN. @ IT
IR (µA) @ VWIB IIB
VRWM (V)
(pF)
(VOLTS)
Vc (V)
(Ma)
300
1
5.00
7.60
50
75
10.0
44.0
6.00
7.90
50
75
11.2
41.0
300
1
7.00
8.33
50
75
12.6
38.0
300
1
8.00
8.89
50
75
13.4
36.0
100
1
8.50
9.44
50
75
14.0
34.0
50
1
10.00
11.10
50
75
16.3
29.0
5
1
12.00
13.30
50
75
19.0
25.0
5
1
15.00
16.70
50
75
23.6
20.0
5
1
18.00
20.00
50
75
28.8
15.0
5
1
22.00
24.40
50
75
35.4
14.0
5
1
26.00
28.90
50
75
42.3
11.1
5
1
30.00
33.30
50
75
48.6
10.0
5
1
36.00
40.00
50
75
60.0
8.6
5
1
45.00
50.00
50
150
77.0
6.8
5
1
51.00
55.50
50
150
88.0
5.8
5
1
Certified RoHS Compliant
UL File # E223026