S-100 100W Single Output Switching Power Supply series Features : AC input range selectable by switch Protections: Short circuit / Overload Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 25KHz Low cost High reliability 1 year warranty SPECIFICATION MODEL OUTPUT S-100-3 S-100-5 S-100-7.5 S-100-10 S-100-12 S-100-15 S-100-18 S-100-24 S-100-27 S-100-36 DC VOLTAGE 3V 5V 7.5V 10V 12V 15V 18V 24V 27V 36V 48V RATED CURRENT 20A 20A 13.6A 10A 8.5A 6.7A 5.6A 4.5A 3.7A 2.7A 2A CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.6A 0 ~ 10A 0 ~ 8.5A 0 ~ 6.7A 0 ~ 5.6A 0 ~ 4.5A 0 ~ 3.7A 0 ~ 2.7A 0 ~ 2A RATED POWER 60W 100W 102W 102W 100.5W 100.8W 108W 99.9W 97.2W 96W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 INPUT 100W S-100-48 2.85 ~ 3.3V 4.75 ~ 5.5V 6.75 ~ 8.25V 9 ~ 11V 2.0% 2.0% 1.0% 1.0% 10.8 ~ 13.2V 13.5 ~ 16.5V 16.2 ~ 19.8V 21.6 ~ 26.4V 26 ~ 32V 32.4 ~ 39.6V 43.2 ~ 52.8V 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.2% LOAD REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.2% SETUP, RISE TIME 200ms, 80ms at full load HOLD UP TIME (Typ.) 24ms at full load VOLTAGE RANGE 85 ~ 132VAC/180 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 70% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.9A/115VAC 0.96A/230VAC COLD START 27A/115VAC 54A/230VAC LEAKAGE CURRENT PROTECTION OVERLOAD WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC 78% 80% 80% 255 ~ 370VDC 81% 81% 82% 84% 84% 84% 84% <1mA / 240VAC 105 ~ 150% rated output power (130 ~ 180% of rated output power for S-100-5, S-100-36 ; 150 ~ 200% of rated output power for S-100-7.5 ) Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Design refer to UL1012 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class B MTBF OTHERS DIMENSION PACKING NOTE 322.4K hrs min. MIL-HDBK-217F (25 199*98*38mm (L*W*H) 0.62Kg; 20pcs/13.6Kg/0.8CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:S-100-SPEC 2008-04-10 S-100 100W Single Output Switching Power Supply Mechanical Specification Case No. 902 series Unit:mm 7 3.5 9 12 197 1 9.5 2 98 80 4 85.5 3 8.2 5 6 7 4- 3.5 M 3 57.5 4.5 120 199 190 Terminal Pin No. Assignment 3.5 Pin No. 1 2 3 38 3 28.5 3.5 3-M 18 18 9 9.5 6.5 Pin No. 4,5 6,7 Assignment AC/L AC/N FG Assignment DC OUTPUT -V DC OUTPUT +V 157 22 Block Diagram fosc : 25KHz 230 115 RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING +V -V O.C.P. FG PWM CONTROL DRIVER Derating Curve Static Characteristics (24V) S-100-12~48 80 S-100-3.3,5 S-100-7.5 60 LOAD (%) OUTPUT VOLTAGE (V) 100 40 20 -10 -10 0 0 10 20 30 40 50 45 AMBIENT TEMPERATURE ( ) 60 55 (VERTICAL) (HORIZONTAL) 350 28 300 24 250 20 200 16 150 12 100 8 50 80 160 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 OUTPUT RIPPLE (mVp-p) Ta=25 32 130 260 INPUT VOLTAGE (V) 60Hz File Name:S-100-SPEC 2008-04-10