S-15 15W Single Output Switching Power Supply series Features : AC input range selected by switch Protections:Short circuit/Over load Cooling by free air convection 100% full load burn-in Fixed switching frequency at 37KHz Lost cost High reliability 1 year warranty SPECIFICATION MODEL OUTPUT INPUT S-15-5 S-15-12 S-15-24 DC VOLTAGE 5V 12V 24V RATED CURRENT 3A 1.3A 0.7A CURRENT RANGE 0 ~ 3A 0 ~ 1.3A 0 ~ 0.7A RATED POWER 15W 15.6W 16.8W RIPPLE & NOISE (max.) Note.2 50mVp-p 50mVp-p 100mVp-p VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 21.6 ~ 26.4V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 0.5% 0.5% SETUP, RISE, HOLD TIME 200ms, 100ms, 30ms at full load VOLTAGE RANGE 85 ~ 132VAC / 170 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 65% AC CURRENT INRUSH CURRENT(max.) 0.5A/115VAC 0.25A/230VAC COLD START 15A/115VAC 30A/230VAC PROTECTION OVER LOAD WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE NOTE 240 ~ 370VDC 68% 72% <0.5mA / 240VAC 105 ~ 150% rated output power Protection type : Fold back current limiting, recovers automatically after fault condition is removed -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH non-condensing 0.02%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Design refer to UL1012 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class B MTBF OTHERS 1.0% LINE REGULATION LEAKAGE CURRENT EMC 1.0% DIMENSION 522.1K hrs min. MIL-HDBK-217F (25 99*97*36mm (L*W*H) PACKING 0.31Kg; 45pcs/15Kg/0.9CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:S-15-SPEC 2004-06-30 S-15 15W Single Output Switching Power Supply Mechanical Specification Case No. 905 20.5 Unit:mm 3.5 51.5 36 55 series 1 9.5 5.5 M 3 97 2 55.5 2- 3 8.2 4 5 3.5 4.5 89 99 6.5 3 3.5 74 18 36 2-M 28 3.5 17.5 7 87 Terminal Pin. No Assignment Pin No. 1 2 Assignment DC OUTPUT +V DC OUTPUT -V Pin No. 3 4,5 Assignment FG AC INPUT Derating Curve Static Characteristics (24V) OUTPUT VOLTAGE (V) 100 80 LOAD (%) 60 40 20 -10 -10 0 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 45 ) 60 55 (VERTICAL) (HORIZONTAL) 350 28 300 24 250 20 200 16 150 12 100 8 50 60 120 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 OUTPUT RIPPLE (mVp-p) Ta=25 32 130 260 INPUT VOLTAGE (V) 60Hz File Name:S-15-SPEC 2004-06-30