MERRIMAC HJF-A-200

0 /180 POWER DIVIDERS/COMBINERS
HJF-A Series
5 to 500 MHz / 4-Port Hybrid Junction / High Isolation / Low Insertion Loss / Hi-Rel Hermetic Pkg
Functional
Schematic, shown
used as 0°/180°
Power Divider
PRINCIPAL SPECIFICATIONS
Model
Number
Frequency
Range,
MHz
Performance
Bandwidth,
MHz
Isolation,
E - H Ports,
dB, Min
Insertion
Loss,
dB, Max.
HJF-A-200
5 - 400
HJF-A-300
100 - 500
5 - 10
10 - 200
200 - 400
100 - 500
30
30
30
25
1.5
1.0
1.5
1.5
A-Size Flatpack Outline
Amplitude Phase
Balance, Balance,
dB, Max.
Max.
± 3°
± 3°
± 3°
± 4°
0.4
0.3
0.4
0.4
VSWR,
Max.
1.5:1
1.3:1
1.5:1
1.4:1
GENERAL SPECIFICATIONS
Impedance:
Coupling:
CW Input:
Weight:
Operating Temperature:
50 Ω nom.
-- 3 dB nom.
1 Watt max.
0.1 oz (2.8 g)nom.
-- 55° to +85°C
Input/Output Relationships
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. All unmarked pins are case ground.
4. Dimensions marked with * apply only at body.
E
Isol.
In
H
In
Isol.
1
0° ref.
0° ref.
2
0°
-- 180°
Typical HJF-A-200 Performance
General Notes:
1. The HJF-A series of four port hybrid junctions uses lumped element circuits to
provide a variety of signal processing functions. Among these are:
a) Power division with phase shift: Signals applied to the delta (∆) port, or E-arm,
will divide equally between output ports 1 and 2 (co-linear arms) and be 180° out
of phase.
b) Power division with no phase shift: Signals applied to the sum (Σ) port, or
H-arm, will divide equally between output ports 1 and 2 (co-linear arms) and be in
phase.
c) Vector addition: Simultaneous application of signals to both E and H arms
results in their vector addition to one co-linear port and vector subtraction at the
other. Correction for the phase difference between E and H paths to the co-linear
ports must be made . This phase equalization may be applied externally or factory
installed within the unit at additional cost.
2. All units comply with MIL-P-23971 and can be supplied screened for compliance
with additional specifications for military and aerospace applications requiring the
highest reliability.
22Feb96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531