I&Q NETWORKS IQP-20R Series Units to 1 GHz / Precision Phase and Amplitude Balance / Hi-Rel Meri-Pac Performance over Video Bandwidth (LO at 500 MHz) PRINCIPAL SPECIFICATIONS Model Number LO Frequency, fo, MHz IQP-20R-60B IQP-20R-***B IQP-20R-***B 60 20 - 160 160 - 1000 Video Bandwidth † 50 MHz 50 MHz † 100 MHz † For complete Model Number replace ***with desired LO Center Frequency, fo in MHz. GENERAL SPECIFICATIONS RF/LO Input Characteristics † RF Bandwidth: Impedance: VSWR: RF Power Level: LO Power Level @ fo: Outline of R - Size Meri-Pac 10% of fo 50 Ω nom. 1.5:1 max. 0 dBm nom. +10 dBm nom. Conversion Loss (RF to I or Q): 10 dB typ., 12 dB max. IF Quadrature Balance (I to Q)@100 kHz IF Phase, @ LO=fo: Phase, @ LO=fo±5%: Ampl., @ LO=fo: Ampl., @ LO=fo±5%: NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Dimensions marked with * apply only at body. 4. All unmarked pins are case ground. ±1° nom., ±2° max. ±3° nom., ±5° max. 0.2 dB max. 0.5 dB max. Weight, nominal: 0.32 oz (9 g) Operating Temperature: -- 55° to +85°C † RF and Video Bandwidths are typically much greater than specified. General Notes: 1. I & Q networks are integrated networks that produce two quadrature phased, equal amplitude signals when fed RF and LO signals. 2. The IQP-20R series are precision tuned at a specified LO to yield excellent phase and amplitude balance values across a 10% LO bandwidth. 3. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. 13Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531