JTP-2S Series QUADRAPHASE MODULATORS 10 to 1000 MHz / Integrated TTL Drivers / Low Conversion Loss / Hi-Rel Hermetic Package PRINCIPAL SPECIFICATIONS Model Number Center Frequency, fo., MHz RF Input Bandwidth Amplitude Balance, dB, Max. JTP-2S-***B JTP-2S-***B 10 to 200 200 to 1000 10% of fo 10% of fo 0.5 1.0 Phase Balance @: fo Band Limits ±2° max. ±3° max. ±4° max. ±5° max. Insertion Loss, dB, Max. VSWR Max. 6 9 1.5:1 1.5:1 For complete Model Number replace *** with desired Center Frequency, fo in MHz. Meri-Pac S-Package GENERAL SPECIFICATIONS Impedance: 50 Ω nom. RF Input Level: 0 dBm nom. Modulation Sequence TTL Data Ports 1,2: 0,0 : ref. 0° 1,0 : +270° 1,1 : +180° 0,1 : +90° Data Bandwidth: DC to 5 MHz nom. (Wider Bandwidths in larger package) NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Lead dimensions apply only at body. 4. All unmarked pins are case ground. DC Power: Weight, nominal: Operating Temp: +5 V @ 25 mA nom. 0.35 oz (10 g) -- 55° to + 85°C General Notes: 1. Units in the JTP-2S series of Quadraphase Modulators are composed of two biphase modulators with TTL drivers, a 90° quadrature hybrid and an in-phase power combiner. 2. These devices are generally used in systems to generate QPSK coded signals. The units accept two differential data inputs each of which independently biphase modulates an RF carrier. These are then combined to produce a quadraphase output of 0, 90, 180 and 270 degrees. 3. Units in the JTP-2S series are available with center frequencies from 10 to 1000 MHz and having a minimum bandwidth equal to 10% of the center frequency. 4. Merrimac Quadraphase Modulators comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military applications requiring the highest reliability. 29Apr96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldwell,NJ,07006 / 201-575-1300 /FAX 201-575-0531