AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER VOLTAGE RANGE CURRENT 6A05S THRU 6A10S 50 to 1000 Volts 1.0 Ampere R-6S FEATURES • • • • Low coat construction Low forward voltage High forward surge current capability High temperature soldering guaranteed: 260/10 secods.0.375”(9.5mm)lead length 1.0(25.4) MIN. 0.360(9.1) 0.340(8.6) 0.280(7.2) DIA. 0.270(6.8) MECHANICAL DATA • • • • • • 0.052(1.3) 0.048(1.2) DIA. Case: Transfer molded plastic Epoxy: UL94V-O rate flame retardant Polarity: Color band denotes cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.06ounce, 1.7 grams 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS VRRM VRMS VDC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at T A= 60℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) 6A05S 50 35 50 6A1S 100 70 100 6A2S 6A4S 200 400 140 280 200 400 6A6S 600 420 600 6A8S 800 560 800 6A10S UNITS 1000 Volts 700 Volts 1000 Volts I(AV) 6.0 Amps IFSM 250 Amps VF 0.95 10.0 500 Volts IR(AV) 500 µA CJ 100 pF Typical Thermal Resistance (Note 1) RθJA 10 ℃/W Operating Junction Temperature Range TJ TSTG （-55 to +150） （-55 to +150） ℃ Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25℃ TA = 100℃ Maximum Full Load Reverse Current, full cycle average 0.375”(9.5mm)lead length at TL=105℃ Typical Junction Capacitance (Note 2) Storage Temperature Range IR Notes: 1. Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, PBC.mounted with 1.1”× 1.1”(30mm× 30mm)copper pads. 2. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC E-mail: [email protected] Web Site: www.cnmic.com µA ℃ AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER VOLTAGE RANGE CURRENT 6A05S THRU 6A10S 50 to 1000 Volts 1.0 Ampere RATING AND CHRACTERISTIC CURVES 6A05S Thur 6A10S FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 Hz Resistive or Inductive loads Group Plane 300 1" X 1" Copper Surface Area Recommended P.C. Board Mounting 4.0 3.0 2.0 1.0 0 0 25 50 60 100 75 150 125 250 CURRENT, (A) PEAK FORWARD SURGE 5.0 (A) AVERAGE FORWARD CURRENT, 6.0 8.3ms Single Half Sine-Wave (JEDEC Method) =T T j jmax 200 100 0 175 2 1 5 8 20 10 50 100 NUMBER OF CYCLES AT 60 Hz AMBIENT TEMPERATURE, (° C) FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 1000 INSTANTANEOUS REVERSE CURRENT, (mA) 10 10 (A) INSTANTANEOUS FORWARD CURRENT, 100 1 T =25° C j Pulse Width=300us 1% Duty Cycle Tj =100° C 1.0 0.1 Tj =25° C 0.01 0 20 40 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE,(pF) 80 PERCENT OF RATED PEAK 0.1 100 TJ=25° C F=1MHz 10 0.1 60 1.0 4.0 10.0 100 REVERSE VOLTAGE,(VOLTS) E-mail: [email protected] Web Site: www.cnmic.com 100 120 140