SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER CURRENT 4.0 Amperes FEATURES O ~ + 1.9 - 2.5 ~ 17 - 18.2 2.03 - 2.41 0.9 - 1.1 4.8 - 5.3 MECHANICAL DATA 0.46 - 0.56 • • Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.15 ounce, 4.0 gram 0.80 - 1.08 • • ~ 10.4 - 10.7 20.7×45 1.5 - 2.03 • • • • 20.7 - 20.9 Plastic package has UL flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength High surge current capability High temperature soldering guaranteed: 260℃/10 seconds, 0.375”(9.5mm) lead length 3.25 - 3.56 • 50 to 1000 Volts VOLTAGE RANGE GBL005 THRU GBL10 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBL GBL SYMBOLS 005 01 Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current, At T C=50℃(Note 1) TA=40℃(Note 2) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 4.0A TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Typical Junction Capacitance per leg (Note 3) Typical Thermal Resistance (Note 1) (Note 2) Operating Junction Temperature Range Storage Temperature Range I(AV) GBL 02 200 140 200 GBL 04 400 280 400 4.0 3.0 GBL 06 600 420 600 GBL 08 800 560 800 GBL 10 1000 700 1000 UNIT Volts Volts Volts Amps IFSM 150 Amps I2 t 93.0 A2s VF 1.0 Volts IR 5.0 500 μA CJ RJA RJC TJ , TSTG 95.0 40.0 22.0 3.5 (-55 to +150) (-55 to +150) Notes: 1. Unit mounted on 3.0×3.0×0.11” thick (7.5×7.5×0.3cm) A1. plate 2. Unit mounted on P.C.B. at 0.375” (9.5mm) lead lengh and 0.5×0.5”(12×12mm) copper pads 3. Measured at 1.0MHz and applied reverse voltage of 4.0 V E-mail: [email protected] Web Site: www.cnmic.com pF ℃/W ℃ ℃ SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER 50 to 1000Volts VOLTAGE RANGE GBL005 THRU GBL10 CURRENT 4.0 Ampere RATINGS AND CHARACTERISTIC CURVES 2KBP005G THRU 2KBP10G FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER ELEMENT FIG. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 70 PEAK FORWARD SURGE, CURRENT,(A) AVERAGE FORWARD OUTPUT, CURRENT,(A) 3.0 2.0 Single Phase Half wave 60Hz Resistive or Inductive Load 0.375"(9.5MM) Lead Length 1.0 0 0 25 75 50 100 125 60 40 30 20 10 175 150 8.3ms Single Half Sine-Wave (JEDEC Method)Tj =T j max 50 0 1 CYCLE 1 2 AMBIENT TEMPERATURE, ℃ 6 8 10 20 40 60 80 100 FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 20 10 10 INSTANTANEOUS FREVERSE CURRENT, (μ A) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER BRIDGE ELEMENT 1.0 0.1 0.01 4 NUMBER OF CYCLES AT 60 Hz Tj =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 Tj =100℃ 0.1 Tj =25℃ FIG. 5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT JUNCTION CAPACITANCE,(pF) 100 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( %) 10 Tj =25℃ f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVRESE VOLTAGE,(V) E-mail: [email protected] Web Site: www.cnmic.com 120 140