MASTER INSTRUMENT CORPORATION SINGLE-PHASE BRIDGE RECTIFIER KBPC1005 THRU KBPC1010 BR305 THRU BR310 VOLTAGE RANGE CURRENT FEATURES l Low cost construction l High forward surge current capability l Ideal for printed circuit board l High isolation voltage from case to leads l High temperature soldering guaranteed: 260 oC/10 second, at 5 lbs. (2.3kg) tension. 50 to 1000 Volts 3.0 Amperes BR-3 0.445( 11.3) 0.405( 10.3) ° 0.10( 2.5) x45 0.158( 4.0) DIA 0.142( 3.6) + AC 0.445( 11.3) 0.620( 15.7) 0.405( 10.3) 0.580( 14.7) AC - 0.620( 15.7) 0.580( 14.7) 0.270( 6.9) 0.230( 5.8) MECHANICAL DATA l Case: Molded plastic body l Terminal: Lead solderable per MIL-STD-202E method 208C. l Polarity: Polarity symbols molded on case l Mounting: Thru hole for #6 screw, 5 in.-lbs torque max. l Weight:0.093ounce, 2.62 grams 0.75( 19.0) MIN 0.85( 21.6) MIN 0.08( 2.0) MIN 0.034( 0.86) DIA 0.028( 0.71) TYP Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. SYMBOLS KBPC1005 KBPC101 KBPC102 KBPC104 KBPC106 BR305 BR31 BR32 BR34 BR36 KBPC108 KBPC1010 BR38 BR310 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts I(AV) 3.0 2.0 Amps IFSM 60 Amps I2 T VF 15 1.0 5.0 0.5 A2S Volts µAmps mAmps VISO 2500 µAmps Typical Junction Capacitance Resistance (Note 1) CJ 20 ℃/W Typical Thermal Resistance per element (Note 2) RθJA 12 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Maximum Average Forward TC=50℃ (Note 2) Rectified Output Current, at TA=25℃ (Note 2) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum Instantaneous Forward Voltage at 5.0A Maximum DC Reverse Current at rated TA=25℃ DC blocking voltage per element TA=100℃ Isolation Voltage from case to leads Operating Temperature Range Storage Temperature Range IR NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 2. Unit mounted on 4.0”×4.0”×0.11” thick (10.5×10.5×0.3mm) Al. plate. 3. Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.5”×0.5” (12×12mm) copper pads. E-mail: [email protected] Web Site: www.cnmic.com 1/2 MASTER INSTRUMENT CORPORATION SINGLE-PHASE BRIDGE RECTIFIER KBPC1005 THRU KBPC1010 BR305 THRU BR310 E-mail: [email protected] VOLTAGE RANGE CURRENT 50 to 1000 Volts 3.0 Amperes Web Site: www.cnmic.com 2/2