SINGLE PHASE BRIDGE RECTIFIER KBPC6005 THRU KBPC610 BR605 THRU BR610 VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Ampere FEATURES • • • • Low cost This series in UL recognized under component index, file number E127707 High forward surge current capacity Ideal for printed circuit board High isolation voltage from case to leads High temperature soldering guaranteed: 260OC / 10 seconds, at 5 lbs. (2.3kg) tension. 0.10( 2.5) x45 0.158( 4.0) DIA 0.142( 3.6) + AC 0.445( 11.3) 0.405( 10.3) AC • • • 0.620( 15.7) 0.580( 14.7) - 0.620( 15.7) 0.580( 14.7) 0.270( 6.9) 0.230( 5.8) MECHANICAL DATA • • • BR-6 0.445( 11.3) 0.405( 10.3) ° • • Technology: Cell with vacuum soldered Case: Molded plastic body Terminal: Lead solderable per MIL-STD-202E method 208C Polarity: Polarity symbols marked on case Mounting: Thru hole for #10 screw, 5 in-lbs torque max. Weight: 0.13 ounce, 3.66 gram 0.75( 19.0) MIN 0.85( 21.6) MIN 0.08( 2.0) MIN 0.042( 1.10) DIA 0.038( 0.97) TYP Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current, at TC = 50℃ (Note 1) TA = 25℃ (Note 2) Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) VRRM VRMS VDC I(AV) KBPC6005 KBPC601 BR605 BR61 50 35 50 100 70 100 KBPC602 BR62 KBPC604 BR64 KBPC606 BR66 KBPC608 BR68 200 140 200 400 280 400 6.0 3.0 600 420 600 800 560 800 KBPC610 BR610 UNIT 1000 700 1000 Volts Volts Volts Amps IFSM 125 Amps Rating for Fusing (t<8.3mS) I2 t 64 A2s Maximum Instantaneous Forward Voltage drop per Bridge element at 3.0 A TA = 25℃ Maximum DC Reverse Current at Rated DC Blocking Voltage per element TA = 100℃ VF 1.0 Volts 5.0 1.0 2500 8.0 -55 to +150 -55 to +150 µA mA Volts O C/W O C O C Isolation Voltage from case to lug Typical Thermal Resistance (Note 1 ) Operating Temperature Rang Storage Temperature Rang IR VISO RθJc TJ TSTG Notes: 1. 2. Unit mounted on 6.0” x 5.5” x 0.11” thick (15×14×0.3cm) AL plate Unit mounted on P.C. Board 0.375” (9.5mm) lead length with 0.47”×0.47” (12×12mm) copper pads. E-mail: [email protected] Web Site: www.cnmic.com SINGLE PHASE BRIDGE RECTIFIER KBPC6005 THRU KBPC610 BR605 THRU BR610 E-mail: [email protected] VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Ampere Web Site: www.cnmic.com