OV-7604-C7 Low Power Clock Oscillator 32.768 kHz DIMENSIONS Recommended Solder Pad: 3,2 1,0 1,7 1,0 0,8 Package: 0,75 0,4 1,0 max. 0,8 0,5 0,5 1,5 2,0 0,5 0,75 100% leadfree, RoHS - compliant Xtal integrated solution Ultra miniature SMT ceramic pack. Ind. and Ext. temperature ranges Package height 1.0 mm Very low power consumption Very tight frequency tolerance Low aging High shock and vibration resistante All dimensions in mm typical DESCRIPTION: This very small SMD ceramic package has been specially designed to combine the 32.768 kHz crystal unit with the CMOS-based oscillator circuit. Ultra Low Power consumption, as low as 300 nA, are made possible through 32.768 kHz Tuning-Fork-Crystals and sophisticated CMOScircuitry. For pick-and-place equipment, the parts are available in 12 mm tape: 7” (178 mm) reel with 3'000 oscillators 10” (254 mm) reel with 7'000 oscillators 13” (330 mm) reel with 14'000 oscillators BLOCK DIAGRAM: 32.768 kHz CRYSTAL 4 VDD 2 GND 1 CLKOUT OUTPUT CONTROL 3 CLKOE PIN CONNECTIONS TOP VIEW: OSC Production Date Code #4 #3 M 708 A 1 7604 #1 Pin 1 Index Pin Connection 1 CLKOUT Frequency output 2 GND Ground 3 CLKOE CLK output enable 4 VDD Power Supply Voltage #2 Part Designation Version 2.0/03.2007 ELECTRICAL CHARACTERISTICS AT 25°C: Output Frequency 1) Frequency tolerance F 32.768 kHz ΔF/F +/-20 ppm VDD 1.2 – 5.5 V 2) IDD 0.3 / 0.5 μA 40 / 60 % Output voltage (high) 3) VOH VDD –0.4 V Output voltage (low) 4) VOL Gnd +0.4 V HCMOS 15 pF IOH 1 mA Supply voltage Current consumption (typ./max.) Duty cycle (min./max.) Output Load Output Current IOL -1 mA Output rise time (max.) 5) tr 70 ns Output fall time (max.) 5) tf 70 ns Start up time (max.) tstart 0.5 s CLK Output Enable (High) VIH 80% VDD min. V CLK Output Disable (Low) VIL 20% VDD max. V +/-1.5 ppm/V ΔF/F +/-3 ppm Turnover temperature (typ.) T0 25 +/-5 °C Frequency vs. temperature ΔF/F0 –0.035 ppm/°C² (T - T0)2 +/-10% ppm Voltage coefficient (max.) Aging first year max. @ 25°C 1) Tighter tolerances on request. 2) VDD = 3.0 V OE. 3) IOH = –1.0 mA. 4) IOL = 1.0 mA. 5) CL = 10 pF, 10% to 90%. ENVIRONMENTAL CHARACTERISTICS: TERMINATIONS AND Conditions Storage temp. range –55 to +125°C Industrial operating temp. range –40 to +85°C Extended operating temp. range –55 to +125°C Max. Dev. Shock resistance ΔF/F 5000 g, 0.3 ms, ½ sine +/-5 ppm Vibration resistance ΔF/F 20 g / 10–2000 Hz +/-5 ppm Package-Type Termination Processing Ceramic For SMD mounting Au flashed pads Reflow soldering 260°C / 20 s max. PROCESSING: FREQUENCY TEMPERATURE 20.0 CHARACTERISTICS: 0.0 -20.0 DF/F [ppm] -40.0 -60.0 -80.0 -100.0 -120.0 -140.0 -160.0 -180.0 -60 -40 -20 0 20 40 60 80 100 T [°C] Tuning Fork Crystal All specifications subject to change without notice. Micro Crystal Div. of ETA SA Mühlestrasse 14 CH-2540 Grenchen Switzerland 03.07 Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 2.0/03.2007