LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL4030P THRU SRL4060P VOLTAGE RANGE 30 t o 60 Volts CURRENT 30.0 Amperes FEATURES • • • • • • • Schottky Barrier Chip Guard Ring Die Construction for Transient Protechion Low Power Loss, High efficiency High Surge Capability High Current capacity and Low Forward Voltage Drop For use in low voltage high frequency inverters, Free wheeling, and polarity protection applications Plastic Material has UL Flammability Classification 94V-0 TO-3P(TO-247AD) MECHANICAL DATA • • • • • • Dimensions in inches and (millimeters) Case: TO-3P(TO-247AD) molded plastic Terminals: Plated Lead solderable per MIL-STD-202 Method 208 Polarity: See Diagram Weight: 5.6 grams (approx) Mounting Position: Any Marking: Type Number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRL SYMBOLS 4030P Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage 30 VRWM DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) 21 Average Rectified Output Current (Note 1)@Tc=95℃ Non-Repetitive Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Forward Voltage Drop @IF =20A,TC=25℃ Peak Reverse Current at Rated DC Blocking Voltage TC = 25℃ TC = 100℃ Typical Junction Capacitance(Note2) Typical Resistance Junction to case(Note1) Operating and Storage Temperature Range SRL 4035P SRL 4040P SRL 4045P SRL 4050P SRL 4060P UNIT 35 40 45 50 60 V 25 28 32 35 42 V IO 40.0 A IFSM 400 A VFM 0.55 2.0 100 800 1.5 (-55 to +150) IRM Cj RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to case mounted on heatsink 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC E-mail: [email protected] Web Site: www.cnmic.com 0.65 V mA pF ℃/W ℃ LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL4030P THRU SRL4060P VOLTAGE RANGE 30 to 60 Volts CURRENT 30.0 Amperes 40 INSTANTANEOUS FORWARD CURRENT, ( A) FIG.1-FORWARD CURRENT DERATING CURVE 30 20 I( AV ) ,AVERAGE FORWARD CURRENT, ( A) RATINGE AND CHARACTERISTIC CURVES SRL4030P THRU SRL4060P 0 0 50 100 TC ,CASE TMPERSTRUE( ℃ ) 150 SRL4030P-SRL4045P 10 0.1 0.2 Tj =25℃ Pulse Width=300μs 2% duty cycle 0.4 0.8 0.6 VF,INSTANTANEOUS FORWARD VOLTAGE( V ) 4000 8.3ms Single Half Sine-Wave JEDEC Method FIG4 TYPICAL JUNCTION CAPACITANCE PER ELEMENT Tj =25℃ f=1MHz C j ,CAPACITANCE( pF) 400 300 1000 200 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 100 0.1 100 FIG.5-TYPICAL REVERSE CHARACTERISTICS T C =100 ℃ IR, INSTANTANOUS REVERSE CURRENT,( mA ) IFSM ,PEAK FORWARD SURGE CURRENT, ( A) SRL4050P-SRL4060P 1.0 FIG.3 MAX NON-REPETITIVE SURGE CURRENT 450 FIG.2-TYPICAL FORWARD CHARACTERISTICS 100 10 T C =75℃ 1.0 0.1 0.01 0 T C =25℃ 40 80 120 PERCENT OF RATED REVERSE VOLTAGE,( % ) E-mail: [email protected] Web Site: www.cnmic.com 1.0 10 VR,REVERSE VOLTAGE( v) 100