GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER W005G THRU W10G VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Amperes FEATURES • • • • • • • Plastic package has underwriters laboratory Flammability classification 94V-0 Glass passivated ship junction High case dielectric strength High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260℃/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension MECHANICAL DATA • • • • Case: Epoxy, Molded Plastic body over passivated Junction Terminal: Plated leads solderable per MIL-STD-750 method 2026 Mounting position: Any Weight: 0.04 ounce, 1.1 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified SYMBOLS W005G W01G Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Output, Current at TA=25℃ (Note 1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage Drop Per element at 1.0A DC Maximum Average Reverse Current at rated DC Blocking Voltage TA = 25℃ TA = 125℃ Typical Junction Capacitance per leg at 4.0V, 1MHz Typical Thermal Resistance (NOTE 1) Operating Temperature Range Storage Temperature Range W02G 200 140 200 W04G 400 280 400 W06G 600 420 600 W08G 800 560 800 W10G 1000 700 1000 UNIT Volts Volts Volts I(AV) 1.0 Amps IFSM 40 Amps I2 t 10 A2S VF 1.0 Volts 5.0 500.0 14 14 36 (-55 to +150) (-55 to +150) µA µA pF IR CJ RθJL RθJA TJ TSTG Notes: 1. Thermal resistance from junction to lead at 0.375”(9.5mm) lead length P.C.B. mounting. E-mail: [email protected] Web Site: www.cnmic.com ℃/W ℃ GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER W005G THRU W10G VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Amperes RATINGS AND CHARACTERISTICS CURVES W005G THRU W10G AVERAGE FORWARD OUTPUT CURRENT,AMPERES 1.6 60 Hz RESISTIVE OR INDUCTIVE LOAD 1.4 1.2 PEAK FORWARD SURGE CURRENT, AMPERES FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 0.375" ( 9.5mm) P.C.B. 1.0 0.22×0.22" (5.5×5.5mm) COPPER PADS 0.8 0.6 CAPACITIVE LOADS Ipk/I(AV)=5.0 0.4 Ipk /I(AV)=10 Ipk /I(AV)=20 0.2 0 20 80 60 40 100 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 35 TA=25℃ SINGLE SINE-WAVE (JEDEC Method) 30 20 10 1.0 CYCLE 0 100 10 1 NUMBER OF CYCLES AT 60 Hz 140 150 120 AMBIENT TEMPERATURE,℃ FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 3 -TYPICAL FORWARD CHARACTERISTICS PER LEG 20 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 50 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 1 0.1 10 TJ =100℃ 1 0.1 T J =25℃ 0.01 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 -TYPICAL JUNCTION CAPACITANCE PER LEG TJ =25℃ f=1.0 MHz Vsig=50mVp-p 10 1 0.1 1 10 40 20 60 100 80 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 TRANSIENT THERMAL IMPEDANCE, ℃/W JUNCTION CAPACITANCE, pF 100 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 10 1 0.1 0.01 E-mail: [email protected] 0.1 1 t, HEATING TIME, sec. REVERSE VOLTAGE,VOLTS Web Site: www.cnmic.com 10 100