0.50mm (.020") Pitch LaneLink™ 4X Cable Assemblies FEATURES AND SPECIFICATIONS LaneLink™ assemblies feature sturdy jack-screw hardware to guarantee secure mating The new 4X Serial Attached SCSI (SAS) and Serial ATA These 4X SAS and SATA I/O assemblies complement (SATA) cable assemblies are the latest addition to the broad line of Molex’s LaneLink offerings. The Molex’s extensive LaneLink product line. Molex’s following list details Molex’s extensive LaneLink superior design and engineering along with state-ofproduct line: the-art manufacturing combine to provide a solution ■ 4X InfiniBand Latch Cable Assembly (Series 74506) for all external, 4X SAS and SATA Input/Output (I/O) ■ 4X 10GBASE-CX4 Latch Cable Assembly (Series applications. 74526) ■ 4X and 12X InfiniBand Latch Receptacle (Series LaneLink 4X SAS and SATA I/O cable assemblies are 91804) designed and engineered to meet the architecture set ■ 4X and 12X InfiniBand Jackscrew Receptacle forth by the T10 SCSI specification. The standard (Series 91803) specifies a high-speed, point-to-point technology, initially designed to operate at speeds up to 3 Gbps, with a roadmap to operate at 12 Gbps. Customer protocol requirements determine which assembly is used, as both designs are identical. 74527 SAS 74530 SATA I/O With storage requirements escalating and becoming more complex, factors such as larger capacity, greater density, security, scalability and accessibility are more critical than ever. Enterprise solutions are recognizing increasing pressure for substantial capacity, performance, lower failure rates and greater choice of components. SAS and SATA I/O solutions meet these demands while providing the highest performance available. Molex is an active member of the SCSI and SATA trade associations. LaneLink 4X assemblies have been accepted by multiple standards groups, or Multi-Source Agreement (MSA) groups, including the T10 SCSI specification, SAS, SATA I/O, 4X and 12X InfiniBand*, 10 Gigabit Ethernet and 10 Gigabit Fibre Channel. Features and Benefits ■ Sturdy jackscrew hardware provides user with guaranteed mating with the PCB connector ■ Molex offers a total system solution providing an industry standard compatible interface with 4X mating connectors SAS (series 74527) cable assembly mating to 4X jackscrew receptacle (series 91803) ■ High performance production test rack provides 100% eye pattern testing to SAS and SATA I/O standards ■ Break-out cables (SAS to SATA) provide an external-to-internal connection SPECIFICATIONS Reference Information Mates With: 91803-XXXX (jackscrew) Designed In: Millimeters Electrical Voltage: 30V AC per contact Current: 0.5A per contact Contact Resistance: 80 ohms Dielectric Withstanding Voltage: 300V min. DC Insulation Resistance: 1000 Megohms minimum between adjacent contacts *InfiniBand is a registered trademark of the InfiniBand Trade Association Mechanical Mating Force: 55.5N (12.36 lbf.) Unmating Force: 49.0N (11.02 lbf.) Durability: 250 cycles Physical Housing: Zinc die-cast Contact: Gold flash over Nickel plating Plating: Contact Area – Nickel Solder Tail Area – Nickel allover Underplating – Gold flash over Paladium Nickel Operating Temperature: -20 to + 85°C ■ LaneLink assemblies are SFF-8470 compliant to meet industry specifications 0.50mm (.020") Pitch LaneLink™ 4X Cable Assemblies APPLICATIONS 74527 SAS 74530 SATA I/O ■ Server storage applications - Network Interface Cards (NIC) and Host Bus Adapters (HBA), routers and servers, storage racks - Redundant Array of Integrated Discs (RAID) devices ■ Industry standard organizations: - 4X and 12X InfiniBand - 10 Gigabit Ethernet - 10 Gigabit Fibre Channel - T10 SCSI/SAS - T13 SATA - SFF Committee Complete end-to-end solution available from Molex; controller card to backplane to SAS or SATA drive ORDERING INFORMATION SAS Cable Assemblies (74527) Order No. Wire Size Cable Length 74527-3001 Specification 0.50m (1.64’) 74527-3002 28 AWG 1.00m (3.28’) 74527-3006 26 AWG 5.00m (16.40’) 74527-3008 24 AWG 7.00m (22.97’) Wire Size Cable Length 74527-3004 3.00m (9.84’) SAS SATA I/O Cable Assemblies (74530) Order No. 74530-0001 74530-0002 28awg 1.00m (3.28’) 74530-0004 26awg 5.00m (16.40’) 74530-0005 24awg 7.00m (22.97’) 74530-0003 Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Specification 0.50m (1.64’) 3.00m (9.84’) Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] SATA I/O cables Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 Visit our Web site at http://www.molex.com/product/io/lanelink.html Order No. USA-309 Printed in USA/JI/2005.05 ©2005 Molex