SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET KEY FEATURES DESCRIPTION control have been designed into these units and since these regulators require only a single output capacitor (SG79xx series) or a capacitor and 5mA minimum load (SG120 series) for satisfactory performance, ease of application is assured. Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used. These devices are available in hermetically sealed TO-257 (both case grounded ‘G’ and isolated ‘IG’), TO-3, TO39 and LCC packages. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com Output Voltage Set Internally to ±1.5% on SG79xxA Output Current to 1.5A Excellent Line and Load Regulation Foldback Current Limiting Thermal Overload Protection Voltages Available: -5V, -12V, -15V Contact Factory for Other Voltage Options Available in Surface Mount Package HIGH RELIABILITY FEATURES - SG79xxA/SG79xx WWW . Microsemi .C OM The SG79xxA/SG79xx series of negative regulators offer self-contained, fixedvoltage capability with up to 1.5A of load current and input voltage up to -30V. With a variety of output voltages this regulator series is an optimum complement to the SG7800A/SG7800 positive three terminal regulators. These units feature a unique band gap reference which allows the SG79xxA series to be specified with an output voltage tolerance of ±1.5%. The SG79xxA versions also offer much improved line regulation characteristics. All protective features of thermal shutdown, current limiting, and safe-area Available to MIL-STD - 883, ¶ 1.2.1 MIL-M38510/11501BXA - JAN7905T MIL-M38510/11505BYA - JAN7905K MIL-M38510/11502BXA - JAN7912T MIL-M38510/11506BYA - JAN7912K MIL-M38510/11503BXA - JAN7915T MIL-M38510/11507BYA - JAN7915K MIL-M38510/11508BYA - JAN7924K MSC-AMSG level "S" Processing Available Available to DSCC – Standard Microcircuit Drawing (SMD) PRODUCT HIGHLIGHT SG79XX Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET ABSOLUTE MAXIMUM RATINGS Input Voltage -5V -12V -15V -35V -35V -40V Input Voltage Differential (Output Shorted to Ground) 35V 35V 35V Operating Junction Temperature .........................................................................................................................................................150°C Storage Temperature Range ................................................................................................................................................. -65°C to 150°C Lead Temperature (Soldering 10 seconds) ..........................................................................................................................................300°C Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of specified terminal. WWW . Microsemi .C OM Device Output Voltage THERMAL DATA K TO-3 3-Pin Metal Can THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA T TO-39 3-Pin Metal Can THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA G THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA 3.5°C/W 42°C/W TO-257 3-Pin Hermetic (Isolated) THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA L 15°C/W 120°C/W TO-257 3-Pin Hermetic THERMAL RESISTANCE-JUNCTION TO CASE, θJC IG 3.0°C/W 35°C/W 4.0°C/W 42°C/W Leadless Chip Carrier 20-Pin Ceramic THERMAL RESISTANCE-JUNCTION TO CASE, θJC 35°C/W 120°C/W PACKAGE DATA THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA Junction Temperature Calculation: TJ = TA + (PD x θJA). The θJA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 2 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET CHARACTERISTIC CURVES WWW . Microsemi .C OM Figure 1 – Maximum Average Power Dissipation Figure 2 – Quiescent Current vs. Load Figure 3 – Temperature Coefficient Figure 4 – Short-circuit Current vs. VIN GRAPHS Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 3 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET CHARACTERISTIC CURVES WWW . Microsemi .C OM Figure 5 – Quiescent Current vs. VIN Figure 6 – Short-circuit Current Vs. VIN Figure 7 – Dropout Characteristics Figure 8 – Ripple Rejection vs. Frequency GRAPHS Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 4 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET APPLICATIONS Note: WWW . Microsemi .C OM Figure 10 – Circuit for Increasing Output Voltage Figure 9 – Fixed Output Regulator 1. C1 is required only if regulator is separated from Note: C3 optional for improved transient response and ripple rectifier filter. rejection. 2. Both C1 and C2 should be low E.S.R. types such R1 + R 2 as solid tantalum. If aluminum electrolytic VOUT = V REGULATOR R1 capacitors are used, at least 10 times values shown should be selected. V REG 3. If large output capacities are used, the regulators R2 = must be protected from momentary input shorts. A 15mA high current diode. ( ( ) ) RECOMMENDED OPERATING CONDITIONS SG79xx / 79xxA Min Typ Max -55 150 Parameter Operating Junction Temperature Range (Note 2) Units °C Note 2: Range over which the device is functional. APPLICATIONS Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 5 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET Parameter Test Conditions Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown Note TJ = 25°C VIN = -7.5V to -25V, TJ = 25°C VIN = -8V to -12V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T – Pkg: IO = 5mA to 500mA, TJ = 250°C VIN = -8V to -20V Power Pkgs: IO = 5mA to 1.0A, P < 20W T – Pkg: IO =5mA to 500mA, P < 20W Over Temperature Range TJ = 25°C With Line: VIN = -8V to -25V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ∆VO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T-Pkg: IO = 500mA Power Pkgs: TJ = 25°C T – Pkg: TJ = 25°C Power Pkgs: VIN = -35V, TJ = 25°C T – Pkg: VIN = -35V, TJ = 25°C ∆VIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100kHz (Note 2) 1000 hours @ TJ = 125°C IO = 5mA Min -4.95 -4.85 -4.85 SG7905A Typ Max -5.00 -5.08 5 25 3 12 15 75 15 25 5 30 -5.00 -5.00 -5.15 -5.15 2.5 2.0 1.3 0.5 0.5 1.1 2.3 3.3 1.4 1.2 0.6 1.5 0.5 54 Min -4.80 -4.70 -4.70 SG7905 Typ -5.00 3 1 15 15 5 Units Max -5.20 50 25 100 25 100 V mV mV mV mV mV -5.00 -5.00 -5.30 -5.30 2.5 2.0 1.3 0.5 0.5 V V mA mA mA mA mA 1.1 2.3 3.3 1.4 1.2 0.6 25 20 175 80 V A A A A dB µV/V mV °C 1.5 0.5 54 25 20 175 80 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7905A / SG7905 with -55°C < TA < 125°C, VIN = -10V, IO = 500mA for the K, G, and IG – Power Packages, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. 1: All regulation tests are made at constant junction temperature with low duty cycle testing. 2: This test is guaranteed but is not tested in production. ELECTRICALS Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 6 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET Parameter Test Conditions Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown Note TJ = 25°C VIN = -14.5V to -30V, TJ = 25°C VIN = -16V to -22V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T – Pkg: IO = 5mA to 500mA, TJ = 25°C VIN = -14.5V to -27V Power Pkgs: IO = 5mA to 1.0A, P < 20W T – Pkg: IO = 5mA to 500mA, P < 2W Over Temperature Range TJ = 25°C With Line: VIN = -14.5V to -30V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ∆VO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T – Pkg: IO = 500mA Power Pkgs: TJ = 25°C T – Pkg: TJ = 25°C Power Pkgs: VIN = -35V, TJ = 25°C T – Pkg: VIN = -35V, TJ = 25°C ∆VIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100kHz (note 2) 1000 hours @ TJ = 125°C IO = 5mA Min -11.8 -11.7 -11.7 SG7912A Typ Max -12.0 -12.2 4 60 3 30 20 90 10 40 10 40 -12.0 -12.0 -12.3 -12.3 4 3 1.0 0.5 0.5 1.1 2.3 3.3 1.4 1.2 0.6 1.5 0.5 54 Min -11.5 -11.4 -11.4 SG7912 Typ -12.0 10 3 12 10 10 Units Max -12.5 120 60 120 60 240 V mV mV mV mV mV -12.0 -12.0 -12.6 -12.6 4 3 1.0 0.5 0.5 V V mA mA mA mA mA 1.1 2.3 3.3 1.4 0.2 0.6 25 60 175 80 V A A A A dB µV/V mV °C 1.5 0.5 54 25 60 175 80 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7912A / SG7912 with -55°C < TA < 125°C, VIN = -19V, IO = 500mA for the K, G, and IG – Power Packages, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. 1: All regulation tests are made at constant junction temperature with low duty cycle testing. 2: This test is guaranteed but is not tested in production. ELECTRICALS Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 7 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET Parameter Test Conditions Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown Note TJ = 25°C VIN = -17.5V to -30V, TJ = 25°C VIN = -20V to -25V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T – Pkg: IO = 5mA to 500mA, TJ = 25°C VIN = -18.5V to -30V Power Pkgs: IO = 5mA to 1.0A, P < 20W T – Pkg: IO = 5mA to 500mA, P < 2W Over Temperature Range TJ = 25°C With Line: VIN = -18.5V to -30V With Load: IO = 5mA to 1.0A (Power Pkgs) IO = 5mA to 500mA (T) ∆VO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T – Pkg: IO = 500mA Power Pkgs: TJ = 25°C T – Pkg: TJ = 25°C Power Pkgs: VIN = -35V, TJ = 25°C T – Pkg: VIN = -35V, TJ = 25°C ∆VIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100kHz (note 2) 1000 hours @ TJ = 125°C IO = 5mA Min -14.8 -14.6 -14.6 SG7915A Typ Max -15.0 -15.2 5 75 3 40 30 100 4 50 10 50 -15.0 -15.0 -15.4 -15.4 4 3 1.0 0.5 0.5 1.1 2.3 3.3 1.4 1.2 0.6 1.5 0.5 54 Min -14.4 -14.25 -14.25 SG7915 Typ -15.0 11 3 12 4 10 Units Max -15.6 150 75 150 75 240 V mV mV mV mV -15.00 -15.00 -15.75 -15.75 4 3 1.0 0.5 0.5 V V mA mA mA mA mA 1.1 2.3 3.3 1.4 1.2 0.6 25 60 175 80 V A A A A dB µV/V mV 1.5 0.5 54 25 60 175 80 WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7915A / SG7915 with -55°C < TA < 125°C, VIN = -23V, IO = 500mA for the K, G, and IG – Power Packages, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. 1: All regulation tests are made at constant junction temperature with low duty cycle testing. 2: This test is guaranteed but is not tested in production. NOTES ELECTRICALS Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 8 SG79xxA / SG79xx ® TM Negative Fixed Voltage Regulator P RODUCT D ATASHEET CONNECTION DIAGRAMS & ORDERING INFORMATION (SEE NOTES BELOW) 2 VOUT Case is VIN 1 GND 2 VOUT 3 VIN Case is VIN VOUT VIN VIN N.C. VIN N.C. GROUND 3 2 1 20 19 4 18 N.C. VO 5 17 GROUND N.C. 6 16 N.C. VO SENSE 7 15 GROUND N.C. 8 14 N.C. 9 10 11 12 13 N.C. VO N.C. 20-Pin Ceramic Leadless Chip Carrier L – Package 1 N.C. 3-Pin Hermetic TO-257 IG – Package (Isolated) GND N.C. 3-Pin TO-39 Metal Can T – Package Connection Diagram N.C. 3-Terminal TO-3 Metal Can K – Package SG79xxAK/883B SG7905AK/DESC SG7912AK/DESC SG7915AK/DESC SG79xxAK SG79xxK/883B JAN7905K JAN7912K JAN7915K SG79xxK SG79xxAT/883B SG7905AT/DESC SG7912AT/DESC SG7915AT/DESC SG79xxAT SG79xxT/883B JAN7905T JAN7912T JAN7915T SG79xxT SG79xxAIG/883B SG7905AIG/DESC SG7912AIG/DESC SG7915AIG/DESC SG79xxAIG SG79xxIG/883B SG79xxIG SG79xxL/883B SG79xxL SG7905AL/DESC SG7912AL/DESC SG7912AL/DESC Ambient Temperature Range -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C N.C. Part No. WWW . Microsemi .C OM Package See Notes 5 & 6 3-Pin Hermetic TO-257 G – Package (Case is VIN) -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C VOUT VIN GROUND Case is VIN MECHANICALS Note SG79xxAG/883B SG7905AG/DESC SG7912AG/DESC SG7915AG/DESC SG79xxAG SG79xxG/883B SG79xxG 1: Contact factory for JAN and DESC product availability. 2: All parts are viewed from the top. 3: “xx” to be replaced by output voltage of specific fixed regulator. 4: Some products will be available in hermetic flat pack (F). Consult factory for price and availability. 5: Both inputs and outputs must be externally connected together at the device terminals. 6: For normal operation, the VO SENSE pin must be externally connected to the load. PRODUCTION DATA – Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time. Copyright © 1997 Rev. 1.6, 2010-07-16 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 9