MRV EM316-2XFP

Datasheet
XFP-to-XFP 10-Gigabit Repeaters
Features
XFP-to-XFP repeater, converter, and WDM transponder
Multiple data rate support (9.95 to 11.32 Gbps)
Flexibility and scalability
- Add or change optics to adjust data rates as needed
- Single item module inventory
Link Integrity Notification (LIN)
Hot-swap support (module and interfaces)
Overview
Fiber Driver chassis compatibility
The Fiber Driver® XFP-to-XFP media modules from MRV
Communications combine ultra high-speed protocol support
with the flexibility of XFP transceivers that support SONET
OC-192, SONET OC-192 with Forward Error Correction (FEC),
10 Gigabit Ethernet, 10 Gbps Fiber Channel, and G.709. The
2XFP modules enable an extremely wide range of optical
infrastructure solutions including media conversion, signal
repeating, lambda conversion, and Wave Division Multiplexing
(WDM).
Management through EM316NM or EM316LNXNM-OT
- Full graphical management with MegaVision Pro®
- SNMP management
- Command line interface (CLI)
2XFPs are an economical alternative for enterprise applications.
They are also ideal for large telecommunications carriers moving
very large amounts of data to distances over 100 kilometers.
XFP feature control through management module
- Digital Diagnostics
- Analog hardware monitoring
- XFI and Lineside loopback modes (XFP dependent)
Benefits
Extend fiber optic links to hundreds of kilometers
Reduce capital and operating expenses
2XFPs are compact, hot-swappable, one-slot modules with two
XFP interface ports. Installation and setup is simple plug-n-play.
Insert the module into any powered Fiber Driver chassis, insert
the XFP transceivers required for the protocol and distance of
the application, and then connect to the network.
Typical Application: Multi-mode to Single-mode Conversion
EM316-2XFP with Management
Module in a 2-slot chassis
Multi-Mode
Switch/Router
Switch/Router
Single-Mode 80 km
Multi-Mode
1
Datasheet
Changing the connection type only requires
changing the hot-swappable XFP transceivers.
Because the transceivers are portable, inventory may
be shared with other applications to maximize the
return on investment. Together, the 2XFP modules
and XFP transceivers greatly reduce the need for onhand parts inventory.
network management module, they support SNMP
and MegaVision Pro®, the MRV Communications
comprehensive network management system.
The management module monitors XFP status,
determines hardware configuration, and provides
vendor information.
For more information on Fiber Driver and other MRV
products, visit http://www.mrv.com or contact MRV
sales as listed below.
2XFP modules fully support the XFP MSA standard
including Digital Diagnostics. Through a Fiber Driver
Physical Specifications
Operating Temperature Range*
00C to 600C (320F to 1400F)
Storage Temperature
-400C to 700C (-400F to 1580F)
Relative Humidity
85% maximum, non-condensing
Physical Dimensions
25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep)
Weight
Approximately 213 g (7.5 oz)
Regulatory Compliance
FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive;
China RoHS; WEEE Directive
*Operating Range listed is for the module only. Operating Range of pluggable interface(s) used may differ.
Supported Protocols
Protocol
10 Gigabit Ethernet
Data Rate (Gbps)
EM316-2XFP
10.00000
XFP-10GD-SX
10G Ethernet 64/66B
Encoded
10.31250
10G Ethernet 64/66B
Encoded 255/238
11.04910
10G Ethernet 64/66B
Encoded 255/237
11.09570
OC-192/STM-64
9.95300
OC-192/STM-64 with FEC,
Reed Solomon 255/238
10.56000
OC-192/STM-64 with FEC,
Reed Solomon 255/237
10.70900
EM316-2XFP-ET
XFP-10GD-SX
XFP-10GD-MMX
XFP-10GD-LR
XFP-10GD-IR2
XFP-10GD-LR2
XFP-DWIR204-XX
XFP-DWLR08-XX
(Table A)
OR
XFP-10GD-MMX
XFP-10GD-LR
XFP-10GD-IR2
XFP-10GD-LR2
XFP-DWIR204-XX
XFP-DWLR08-XX
(Table A)
XFP-10GD-SX
XFP-10GD-MMX
XFP-10GD-LR
XFP-10GD-IR2
XFP-10GD-LR2
XFP-DWIR204-XX
10G Fibre Channel
10.51875
XFP-DWLR08-XX
10G Fibre Channel 64/66B
Encoded 255/238
11.27000
(Table A)
10G Fibre Channel 64/66B
Encoded 255/237
11.32000
2
XFP-10GD-IR04P
XFP-10GD-LR08P
XFP-10GD-LR12P
XFP-DWIR04P-XX
XFP-DWLR08P-XX
XFP-DWLR12P-XX
(Table B)
Ordering Info
Datasheet
Model Number
Description
Data Rate
Connectors
Compatible XFPs
EM316-2XFP
10 Gig Transponder, based on dual
XFP pluggable optics
Data rate independent, protocol
transparent from 9.95 to 11.32 Gbps
XFP (x2)
See table A
EM316-2XFP-ET
10 Gig Transponder, based on dual XFP
pluggable optics with 10 Gig Ethernet
LAN PHY External Reference Clock
Data rate independent, protocol
transparent from 9.95 to 11.32 Gbps
XFP (x2)
See table A and table B
Wavelength, budget, and range are all dependent on the XFP transceivers installed in the module. Aside from the
protocol-specific reference clock requirement, the XFP groups below provide equivalent signal quality and optical
performance.
Table A
The XFP devices in Table A are compatible with both the EM316-2XFP and EM316-2XFP-ET modules. These XFPs do
not require an external reference clock, and they support the XFI loopback mode.
Model Number
XFP Description (NO external reference clock required)
XFP-10GD-SX
10-GbE, or 10GFC, MM, 850nm, 300M with Digital Diagnostics.
XFP-10GD-MMX
10-GbE, or 10GFC, Extended MM, 1310nm, 500m with Digital Diagnostics.
XFP-10GD-LR
OC192/STM-64, 10GE or 10G FC, SM, 1310nm, 10km, with Digital Diagnostics.
XFP-10GD-IR2
OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 40km, with Digital Diagnostics.
XFP-10GD-LR2
OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 80km, with Digital Diagnostics.
XFP-DWIR204-XX
OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 40 km, with Digital Diagnostics.
XFP-DWLR08-XX
OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 80 km, with Digital Diagnostics.
XFP-CX4
10GBase-CS4 Copper Transceiver, 15m, IEEE 802.3ak compliant.
Table B
The XFP devices in Table B are compatible with the EM316-2XFP-ET module only. These XFPs require an external
reference clock, and they support the XFI and lineside loopback modes.
Model Number
XFP Description (external reference clock required)
XFP-10GD-IR04P
OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 40km, with Digital Diagnostics.
XFP-10GD-LR08P
OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 80km, with Digital Diagnostics.
XFP-10GD-LR12P
OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 120km, with Digital Diagnostics.
XFP-DWIR04P-XX
OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 40 km, with Digital Diagnostics.
XFP-DWLR08P-XX
OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 80 km, with Digital Diagnostics.
XFP-DWLR12P-XX
OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 120 km, with Digital Diagnostics.
MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com.
Please e-mail us at sales@mrv.com or call us for assistance.
MRV Los Angeles
20415 Nordhoff St.
Chatsworth, CA 91311
800-338-5316
818-773-0900
MRV Boston
295 Foster St.
Littleton, MA 01460
800-338-5316
978-952-4700
MRV International
Business Park Moerfelden
Waldeckerstrasse 13
64546 Moerfelden-Walldorf
Germany
Tel. (49) 6105/2070
Fax (49) 6105/207-100
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the
accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information.
MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-FD-2XFP-101608
1398024-001 Rev. A6
Copyright ©2008 MRV Communications, Inc. All Rights Reserved.