Optical Communications Systems™ Datasheet XFP-to-XFP 10-Gigabit Repeaters Highlights XFP-to-XFP repeater, converter, and WDM transponder Multiple data rate support (9.95 to 11.32 Gbps) Flexibility and scalability - Add or change optics to adjust data rates as needed - Single item module inventory Link Integrity Notification (LIN) Hot-swap support (module and interfaces) Fiber Driver chassis compatibility Overview The Fiber Driver® XFP-to-XFP media modules from MRV Communications combine ultra high-speed protocol support with the flexibility of XFP transceivers that support SONET OC-192, SONET OC-192 with Forward Error Correction (FEC), 10 Gigabit Ethernet, 10 Gbps Fiber Channel, and G.709. The 2XFP modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing (WDM). 2XFPs are an economical alternative for enterprise applications. They are also ideal for large telecommunications carriers moving very large amounts of data to distances over 100 kilometers. Management through EM316NM or EM316LNXNM-OT - Full graphical management with MegaVision Pro® - SNMP management - Command line interface (CLI) XFP feature control through management module - Digital Diagnostics - Analog hardware monitoring - XFI and Lineside loopback modes (XFP dependent) Benefits Extend fiber optic links to hundreds of kilometers Reduce capital and operating expenses 2XFPs are compact, hot-swappable, one-slot modules with two XFP interface ports. Installation and setup is simple plug-n-play. Insert the module into any powered Fiber Driver chassis, insert the XFP transceivers required for the protocol and distance of the application, and then connect to the network. Typical Application: Multi-mode to Single-mode Conversion EM316-2XFP with Management Module in a 2-slot chassis Multi-Mode Switch/Router Switch/Router Single-Mode 80 km Multi-Mode 1 Optical Communications Systems™ Datasheet Changing the connection type only requires changing the hot-swappable XFP transceivers. Because the transceivers are portable, inventory may be shared with other applications to maximize the return on investment. Together, the 2XFP modules and XFP transceivers greatly reduce the need for onhand parts inventory. network management module, they support SNMP and MegaVision Pro®, the MRV Communications comprehensive network management system. The management module monitors XFP status, determines hardware configuration, and provides vendor information. For more information on Fiber Driver and other MRV products, visit http://www.mrv.com or contact MRV sales as listed below. 2XFP modules fully support the XFP MSA standard including Digital Diagnostics. Through a Fiber Driver Physical Specifications Operating Temperature Range* 00C to 600C (320F to 1400F) Storage Temperature -400C to 700C (-400F to 1580F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep) Weight Approximately 213 g (7.5 oz) Regulatory Compliance FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; WEEE Directive *Operating Range listed is for the module only. Operating Range of pluggable interface(s) used may differ. Supported Protocols Protocol 10 Gigabit Ethernet Data Rate (Gbps) EM316-2XFP 10.00000 XFP-10GD-SX 10G Ethernet 64/66B Encoded 10.31250 10G Ethernet 64/66B Encoded 255/238 11.04910 10G Ethernet 64/66B Encoded 255/237 11.09570 OC-192/STM-64 9.95300 OC-192/STM-64 with FEC, Reed Solomon 255/238 10.56000 OC-192/STM-64 with FEC, Reed Solomon 255/237 10.70900 EM316-2XFP-ET XFP-10GD-SX XFP-10GD-MMX XFP-10GD-LR XFP-10GD-IR2 XFP-10GD-LR2 XFP-DWIR204-XX XFP-DWLR08-XX (Table A) OR XFP-10GD-MMX XFP-10GD-LR XFP-10GD-IR2 XFP-10GD-LR2 XFP-DWIR204-XX XFP-DWLR08-XX (Table A) XFP-10GD-SX XFP-10GD-MMX XFP-10GD-LR XFP-10GD-IR2 XFP-10GD-LR2 XFP-DWIR204-XX 10G Fibre Channel 10.51875 XFP-DWLR08-XX 10G Fibre Channel 64/66B Encoded 255/238 11.27000 (Table A) 10G Fibre Channel 64/66B Encoded 255/237 11.32000 2 XFP-10GD-IR04P XFP-10GD-LR08P XFP-10GD-LR12P XFP-DWIR04P-XX XFP-DWLR08P-XX XFP-DWLR12P-XX (Table B) Optical Communications Systems™ Ordering Info Datasheet Model Number Description Data Rate Connectors Compatible XFPs EM316-2XFP 10 Gig Transponder, based on dual XFP pluggable optics Data rate independent, protocol transparent from 9.95 to 11.32 Gbps XFP (x2) See table A EM316-2XFP-ET 10 Gig Transponder, based on dual XFP pluggable optics with 10 Gig Ethernet LAN PHY External Reference Clock Data rate independent, protocol transparent from 9.95 to 11.32 Gbps XFP (x2) See table A and table B Wavelength, budget, and range are all dependent on the XFP transceivers installed in the module. Aside from the protocol-specific reference clock requirement, the XFP groups below provide equivalent signal quality and optical performance. Table A The XFP devices in Table A are compatible with both the EM316-2XFP and EM316-2XFP-ET modules. These XFPs do not require an external reference clock, and they support the XFI loopback mode. Model Number XFP Description (NO external reference clock required) XFP-10GD-SX 10-GbE, or 10GFC, MM, 850nm, 300M with Digital Diagnostics. XFP-10GD-MMX 10-GbE, or 10GFC, Extended MM, 1310nm, 500m with Digital Diagnostics. XFP-10GD-LR OC192/STM-64, 10GE or 10G FC, SM, 1310nm, 10km, with Digital Diagnostics. XFP-10GD-IR2 OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 40km, with Digital Diagnostics. XFP-10GD-LR2 OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 80km, with Digital Diagnostics. XFP-DWIR204-XX OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 40 km, with Digital Diagnostics. XFP-DWLR08-XX OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 80 km, with Digital Diagnostics. XFP-CX4 10GBase-CS4 Copper Transceiver, 15m, IEEE 802.3ak compliant. Table B The XFP devices in Table B are compatible with the EM316-2XFP-ET module only. These XFPs require an external reference clock, and they support the XFI and lineside loopback modes. Model Number XFP Description (external reference clock required) XFP-10GD-IR04P OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 40km, with Digital Diagnostics. XFP-10GD-LR08P OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 80km, with Digital Diagnostics. XFP-10GD-LR12P OC192/STM-64, 10GE or 10G FC, SM, 1550nm, 120km, with Digital Diagnostics. XFP-DWIR04P-XX OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 40 km, with Digital Diagnostics. XFP-DWLR08P-XX OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 80 km, with Digital Diagnostics. XFP-DWLR12P-XX OC192/STM-64, 10GE or 10G FC, SM DWDM (XX + ITU C-Band Channels 17-61 for 100 GHZ), 120 km, with Digital Diagnostics. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles 20415 Nordhoff Street Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 300 Apollo Drive Chelmsford, MA 01824 800-338-5316 978-674-6800 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-2XFP-081310 1398024-001 Rev. A7 Copyright ©2010 MRV Communications, Inc. All Rights Reserved.