HL01RZC 1 WATT REGULATED DC/DC CONVERTER FEATURES LOW COST NON-CONDUCTIVE CASE INTERNAL INPUT AND OUTPUT FILTERING SHORT CIRCUIT PROTECTED BUILT-IN STANDOFFS INDUSTRY STANDARD PINOUT ROHS COMPLIANT DESCRIPTION The HL01RZC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 125kHz push-pull oscillator is used in the input stage. Beat-frequency oscillator problems are reduced when using the HL01RZC Series with high frequency isolation amplifiers. Reduced parts count and all surface mount construction add to the reliability of the HL01RZC Series. The use of surface mount devices and magnetics eliminate hand soldering operations. This "hands-free" construction increases quality and reliability while keeping cost low. ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.2W Short Circuit Duration....................................................Continuous Lead Temperature (soldering, 10 seconds max)................+300°C * *Note: Refer to Reflow Profile for SMD Models. TYPICAL PERFORMANCE CURVES HL01R xxyzz Z RECOMMENDED LAND PATTERN Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. 0.100" (2.54) EFFICIENCY vs LOAD 60% 2423 22 1514 13 50% Efficiency (%) C Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant 0.080" (2.03) 0.730" (18.54) 40% 0.040" (1.02) 30% 1 2 3 20% 10 11 12 1.150" (29.21) 10% 0% 0% 25% 50% Load (mA) 75% 100% For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries email: [email protected], tel: +1 508 339 3000 HL01RZC.B02 Page 1 of 3 HL01RZC 1 WATT REGULATED DC/DC CONVERTER ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT (VDC) (VDC) (mA) (mA) HL01R05S05ZC HL01R05S12ZC HL01R05S15ZC 5 5 5 5 12 15 200 83 67 50 50 50 400 400 400 58 52 52 HL01R12S05ZC HL01R12S12ZC HL01R12S15ZC 12 12 12 5 12 15 200 83 67 40 40 40 160 160 160 58 52 52 HL01R15S05ZC HL01R15S12ZC HL01R15S15ZC 15 15 15 5 12 15 200 83 67 30 30 30 130 130 130 58 52 52 HL01R24S05ZC HL01R24S12ZC HL01R24S15ZC 24 24 24 5 12 15 200 83 67 20 20 20 80 80 80 58 52 52 HL01R05D05ZC HL01R05D12ZC HL01R05D15ZC 5 5 5 ±5 ±12 ±15 ±100 ±41 ±33 50 50 50 425 400 400 45 53 53 HL01R12D05ZC HL01R12D12ZC HL01R12D15ZC 12 12 12 ±5 ±12 ±15 ±100 ±41 ±33 40 40 40 185 160 160 45 53 53 HL01R15D05ZC HL01R15D12ZC HL01R15D15ZC 15 15 15 ±5 ±12 ±15 ±100 ±41 ±33 30 30 30 145 130 130 45 53 53 HL01R24D05ZC HL01R24D12ZC HL01R24D15ZC 24 24 24 ±5 ±12 ±15 ±100 ±41 ±33 20 20 20 90 80 80 45 53 53 TYP MAX MODEL INPUT CURRENT MIN LOAD RATED LOAD (mA) EFFICIENCY (%) Note: Other input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range MIN 4.75 11.4 14.25 22.8 Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign Moisture Sensitivity Level (MSL) TEMPERATURE Specification Operation Storage www.murata-ps.com 5 12 15 24 30 5.25 12.6 15.75 25.2 100 VDC VDC VDC VDC mAp-p VISO= 240VAC, 60Hz 1 25 2 10 VDC Vpk GΩ pF μArms BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load 1 ±3 ±0.01 30 1 ±0.1 ±0.5 ±5 ±0.02 100 10 ±1 ±1 W % %/°C mVp-p mVrms % % 60 Hz, 10 Seconds 500 500 UNITS 125 10 kHz g 675 2 kHr Circuit Stress Method IPC/JEDEC J-STD-20 -25 -40 -40 +70 +85 +110 °C °C °C Technical enquiries email: [email protected], tel: +1 508 339 3000 HL01RZC.B02 Page 2 of 3 HL01RZC MECHANICAL 1 WATT REGULATED DC/DC CONVERTER Package/Pinout "Z" Ò Ò TOP VIEWS Ò Ò (,2XXYZZ:# Ò Ò SIDE VIEWS Ò Ò Ò Ò Ò Ò Ò Ò END VIEWS Ò Ò Ò Ò NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. PIN CONNECTIONS SMD PACKAGE PIN# SINGLES DUALS GRID: 0.100 inches (2.54 millimeters) 1 2 3 +VIN NU NU +VIN -VOUT Common Typically Marked with: specific model ordered, date code, job code and Logo. 10 11 12 -VOUT +VOUT -VIN Common +VOUT -VIN Pin base metal is phosphor bronze. Pin finish is matte tin (100-300 microinches) over a nickel barrier layer (5-40 microinches). 13 14 15 -VIN +VOUT -VOUT -VIN +VOUT Common 22 23 24 NU NU +VIN Common -VOUT +VIN All dimensions are in inches (millimeters). SMT SOLDERING INFORMATION The surface mount versions of the HL01RZC series are designed for SMT reflow soldering. During this standard process devices should be heated at a rate not to exceed 3 degrees C per second. The peak reflow temperature is 260 degrees C. The device should not be exposed to the peak temperature ±10 degrees C for more than 12 seconds. The cool down rate for this device should not exceed 3 degrees C per second. THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. USA: Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: [email protected] ISO 9001 REGISTERED 10/10/08 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. 10/10/08 www.murata-ps.com Mansfield (MA), Tel: (508) 339-3000, email: [email protected] Canada: Toronto, Tel: (866) 740-1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] Technical enquiries email: [email protected], tel: +1 508 339 3000 HL01RZC.B02 Page 3 of 3