This data sheet contains core information only. Please click here for the full data sheet. UWE Series www.murata-ps.com Wide Input, Isolated Eighth-Brick DC/DC Converters T UWE Series "Eighth-Brick" DC/DC Converters are high-current isolated The power modules designed for use in high-density system boards. Contents of full data sheet Description, Photograph, Connection Diagram Ordering Guide, Model Numbering Mechanical Specifications, Input/Output Pinout Detailed Electrical Specifications Soldering Guidelines, Technical Notes Performance Data Shipping Tray Typical unit FEATURES PRODUCT OVERVIEW Industry-standard through-hole eighth-brick package with 0.9" x 2.3" x 0.38" outline dimensions Choice of two wide input ranges, 9-36 Vdc or 18-75 Vdc Fixed output from 3.3 to 24 Volts DC up to 75 Watts Synchronous rectification yields very high efficiency and low power dissipation Operating temperature range from -40 to +85˚C with derating Up to 1500 Volt DC isolation (basic insulation) With dimensions of only 0.9 by 2.3 by 0.38 inches, the UWE series open frame DC/DC converters deliver up to 75 Watts in an industry-standard “eighth-brick” through-hole package. This format can plug directly into quarter-brick pinouts. Several standard fixed-output voltages from 3.3 Vdc to 24 Vdc assure compatibility in embedded equipment, CPU cards and instrument subsystems. The extended 4-to-1 input power range (9-36V) is ideal for battery-powered, telecom or portable applications. Very high efficiency means no fans or temperature deratings in many applications. An optional thermal mounting baseplate extends operation into most conceivable environments. The synchronous rectifier design uses the maximum available duty cycle for greatest efficiency and low power dissipation with no reverse output conduction. Other features include low on-resistance FET’s, planar magnetics and heavycopper PC boards. These deliver low output noise, Outstanding thermal performance and derating Extensive self-protection, overtemperature and overload features with no output reverse conduction On/Off control, trim and remote sense functions Meets UL/EN/IEC 60950-1, CAN/CSA-C22.2 No. 60950-1 safety approvals and FCC RFI/ EMI certification Pre-bias operation for startup protection Page 1 2 3 5 9 13 21 tight line/load regulation, stable no-load operation and fast load step response. All units are precision assembled in a highly automated facility with ISOtraceable manufacturing quality standards. Isolation of 1500 Volts assures safety and fully differential (floating) operation for greatest application flexibility. On-board Sense inputs compensate for line drop errors at high output currents. Outputs are trimmable within ±10% of nominal voltage. The UWE series are functionally complete. A wealth of protection features prevents damage to both the converter and outside circuits. Inputs are protected from undervoltage and outputs feature short circuit protection, overcurrent and excess temperature shut down. Overloads automatically recover using the “hiccup” technique upon fault removal. The UWE is designed to meet all standard safety and EMI/RFI certifications. All units meet RoHS-6 hazardous materials compliance. +VOUT +VIN SWITCH DRIVE VOLTAGE REGULATOR SS +SENSE −VOUT PWM –VIN −SENSE ON/OFF CONTROL ISOLATION REFERENCE AMPLIFIER, TRIM AND FEEDBACK UV, OT Typical topology is shown. For full details go to www.murata-ps.com/rohs TRIM Simplified Block Diagram www.murata-ps.com email: [email protected] 22 Sep 2009 MDC_UWE Series.A23_short Page 1 of 4 This data sheet contains core information only. Please click here for the full data sheet. UWE Series Wide Input, Isolated Eighth-Brick DC/DC Converters SPECIFICATION SUMMARY AND ORDERING GUIDE c Output Root Model c VOUT (V) IOUT (A) Power (W) UWE-3.3/20-Q12P-C 3.3 20 UWE-3.3/20-Q48N-C 3.3 20 UWE-5/15-Q12P-C 5.0 15 UWE-5/15-Q48N-C 5.0 15 UWE-12/6-Q12P-C 12.0 UWE-12/6-Q48N-C UWE-15/5-Q12P-C UWE-24/3-Q12P-C g Input R/N (mVp-p) ➂ Regulation (max.) VIN Nom. Range (V) (V) Efficiency IIN, no load (mA) IIN, full load (A) Typ. Max. Line Load 66 80 125 ±0.25% ±0.25% 12 9-36 160 6.18 87% 89% 66 165 225 ±0.2% ±0.25% 48 18-75 75 1.54 88% 89.5% 75 80 125 ±0.25% ±0.125% 12 9-36 185 6.87 89% 91% 75 135 150 ±0.25% ±0.075% 48 18-75 90 1.74 88.5% 90% 6 72 120 180 ±0.125% ±0.05% 12 9-36 75 6.56 90% 91.5% 12.0 6 72 115 150 ±0.1% ±0.075% 48 18-75 90 1.65 89% 91% 15.0 5 75 65 125 ±0.125% ±0.075% 12 9-36 270 6.83 89.5% 91.5% 24.0 3 72 190 275 ±0.125% ±0.125% 12 9-36 110 6.70 88.3% 89.5% c Please refer to the part number structure for additonal ordering model numbers and options. d All specifications are at nominal line voltage, nominal output voltage and full load, +25° C. unless otherwise noted. See detailed specifications. e Output capacitors are 1 μF ceramic in parallel with 10 μF electrolytic. Input cap is 100 μF. All Min. Typ. Package (Case, Pinout) C77, P32 f I/O caps are necessary for our test equipment and may not be needed for your application. g Load regulation range: 0.1-3A. This is required only for our test equipment. The converter will operate at zero output current with degraded regulation. caps are low ESR types. Contact Murata Power Solutions for details. PART NUMBER STRUCTURE U W E - 12 / 6 - Q12 P B LX - C RoHS Hazardous Materials Compliance C=RoHS-6, standard (does not claim EU RoHS exemption 7b–lead in solder) Unipolar, Single-output Wide Input Range Eighth-Brick Package Nominal Output Voltage Maximum Rated Output Current in Amps Note: Some model number combinations may not be available. Contact Murata Power Solutions for further information. Pin Length Option Blank = Standard pin length 0.19 inches (4.8mm) L1 = Pin length 0.110 inches (2.79mm)* L2 = Pin length 0.145 inches (3.68mm)* * Special quantity order is required. Baseplate (optional) Blank = No baseplate (standard) B = Baseplate installed (optional special order) On/Off Control Polarity P = Positive polarity (standard for Q12 models, optional for Q48 models) N = Negative polarity (standard for Q48 models, optional special order for Q12 models) Input Voltage Range Q12 = 9-36 Volts Q48 = 18-75 Volts www.murata-ps.com email: [email protected] 22 Sep 2009 MDC_UWE Series.A23_short Page 2 of 4 This data sheet contains core information only. Please click here for the full data sheet. UWE Series Wide Input, Isolated Eighth-Brick DC/DC Converters MECHANICAL SPECIFICATIONS—NO BASEPLATE 2.30 (58.4) TOP VIEW ISOMETRIC VIEW 0.90 (22.9) .071±.002 STANDOFF .040 PIN AT EACH END VIEW SIDE VIEW 0.19 (4.8) @ .062 PINS 0.38 (9.7) MAX MOUNTING PLANE .040±.002 AT PINS 1-3, 5-7 0.19 (4.8) @ .040 PINS .062±.002 AT PINS 4 & 8 0.15 (3.8) I/O CONNECTIONS Pin 2.000 (50.8) PIN 1 PIN 4 PIN 5 BOTTOM VIEW 0.600 (15.24) 0.300 0.45 (7.62) (11.43) 0.150 (3.81) 0.150 (3.81) PIN 2 Function 1 - Vin 2 On/Off Control * 3 +Vin 4 - Vout 5 - Sense 6 Trim 7 + Sense 8 + Vout * The Remote On/Off can be provided with either positive (P suffix) or negative (N suffix) polarity 0.600 (15.24) REF Connect each sense input to its respective Vout if sense is not connected at a remote load. PIN 6 PIN 7 PIN 8 PIN 3 Dimensions are in inches (mm) shown for ref. only. MATERIAL: .040 PINS: C26000 BRASS, 3/4 HARD .062 PINS: C10200 COPPER ALLOY, FULL HARD Third Angle Projection FINISH: (ALL PINS) GOLD (5 MICROINCHES MIN) OVER NICKEL (50 MICROINCHES MIN) Tolerances (unless otherwise specified): .XX ± 0.02 (0.5) .XXX ± 0.010 (0.25) Angles ± 2˚ Components are shown for reference only. www.murata-ps.com email: [email protected] 22 Sep 2009 MDC_UWE Series.A23_short Page 3 of 4 This data sheet contains core information only. Please click here for the full data sheet. UWE Series Wide Input, Isolated Eighth-Brick DC/DC Converters MECHANICAL SPECIFICATIONS (continued)—BASEPLATE INSTALLED 4X THRU M2X0.4 - 6H .15" MAX SCREW PENETRATION 2.30 (58.4) TOP VIEW 0.90 (22.9) ISOMETRIC VIEW 0.625 (15.9) 0.40 (10.2) 1.500 (38.1) .071±.002 STANDOFF .040 PIN AT EACH SIDE VIEW 0.14 (3.6) ALUMINUM BASEPLATE END VIEW 0.19 (4.8) @ .062 PINS 0.48 (12.3 ±0.5) MOUNTING PLANE .040±.002 AT PINS 1-3, 5-7 0.19 (4.8) @ .040 PINS .062±.002 AT PINS 4 & 8 2.000 (50.8) 0.15 (3.8) PIN 1 PIN 4 BOTTOM VIEW 0.600 (15.24) 0.300 0.45 (7.62) (11.43) PIN 5 0.150 (3.81) 0.150 (3.81) PIN 2 PIN 6 PIN 7 PIN 8 PIN 3 0.600 (15.24) REF Dimensions are in inches (mm) shown for ref. only. Third Angle Projection MATERIAL: .040 PINS: C26000 BRASS, 3/4 HARD .062 PINS: C10200 COPPER ALLOY, FULL HARD Tolerances (unless otherwise specified): .XX ± 0.02 (0.5) .XXX ± 0.010 (0.25) Angles ± 2˚ FINISH: (ALL PINS) GOLD (5 MICROINCHES MIN) OVER NICKEL (50 MICROINCHES MIN) Components are shown for reference only. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. www.murata-ps.com/locations email: [email protected] 22 Sep 2009 MDC_UWE Series.A23_short Page 4 of 4