Pb Free Product NCE3010S http://www.ncepower.com NCE N-Channel Enhancement Mode Power MOSFET DESCRIPTION The NCE3010S uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. It can be used in a wide variety of applications. GENERAL FEATURES ● VDS =30V,ID =10A RDS(ON) < 13.5mΩ @ VGS=10V Schematic diagram RDS(ON) < 20mΩ @ VGS=4.5V ● High density cell design for ultra low Rdson ● Fully characterized Avalanche voltage and current Application ● Power switching application ● Hard Switched and High Frequency Circuits ● Uninterruptible Power Supply Marking and pin Assignment 100% UIS TESTED! SOP-8 top view Package Marking And Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity 3010S NCE3010S SOP-8 Ø330mm 12mm 2500 units Absolute Maximum Ratings (TA=25℃unless otherwise noted) Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS Limit Unit 30 V ±20 V ID 10 A ID (100℃) 6 A Pulsed Drain Current IDM 50 A Maximum Power Dissipation PD 2.5 W TJ,TSTG -55 To 150 ℃ RθJC 50 ℃/W Drain Current-Continuous Drain Current-Continuous(TC=100℃) Operating Junction and Storage Temperature Range Thermal Characteristic Thermal Resistance,Junction-to-Case(Note 2) Electrical Characteristics (TA=25℃unless otherwise noted) Wuxi NCE Power Semiconductor Co., Ltd Page 1 v1.0 Pb Free Product NCE3010S http://www.ncepower.com Parameter Symbol Condition Min Typ Max Unit Drain-Source Breakdown Voltage BVDSS VGS=0V ID=250μA 30 Zero Gate Voltage Drain Current IDSS VDS=30V,VGS=0V 1 μA Gate-Body Leakage Current IGSS VGS=±20V,VDS=0V ±100 nA Gate Threshold Voltage VGS(th) VDS=VGS,ID=250μA 3 V Drain-Source On-State Resistance RDS(ON) Off Characteristics V On Characteristics (Note 3) Forward Transconductance gFS 1 VGS=10V, ID=10A 11 VGS=4.5V, ID=5A 16.5 VDS=15V,ID=10A 13.5 20 15 mΩ S Dynamic Characteristics (Note4) Input Capacitance Clss Output Capacitance Coss Reverse Transfer Capacitance Crss VDS=15V,VGS=0V, F=1.0MHz 1550 PF 300 PF 180 PF 30 nS Switching Characteristics (Note 4) Turn-on Delay Time td(on) Turn-on Rise Time tr VDD=25V,ID=1A 20 nS td(off) VGS=10V,RGEN=6Ω 100 nS 80 nS 13 nC 5.5 nC 3.5 nC Turn-Off Delay Time Turn-Off Fall Time tf Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd VDS=15V,ID=10A, VGS=5V Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) VSD Diode Forward Current (Note 2) IS VGS=0V,IS=10A 1.2 V 10 A Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production Wuxi NCE Power Semiconductor Co., Ltd Page 2 v1.0 Pb Free Product http://www.ncepower.com NCE3010S Test circuit 1）EAS test Circuits 2）Gate charge test Circuit: 3）Switch Time Test Circuit： Wuxi NCE Power Semiconductor Co., Ltd Page 3 v1.0 Pb Free Product NCE3010S http://www.ncepower.com ID- Drain Current (A) Normalized On-Resistance TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS (Curves) TJ-Junction Temperature(℃) Vds Drain-Source Voltage (V) Figure 4 Rdson-JunctionTemperature ID- Drain Current (A) Vgs Gate-Source Voltage (V) Figure 1 Output Characteristics Qg Gate Charge (nC) Figure 2 Transfer Characteristics Figure 5 Gate Charge Is- Reverse Drain Current (A) Rdson On-Resistance Normalized Vgs Gate-Source Voltage (V) ID- Drain Current (A) Vsd Source-Drain Voltage (V) Figure 3 Rdson- Drain Current Wuxi NCE Power Semiconductor Co., Ltd Figure 6 Source- Drain Diode Forward Page 4 v1.0 Pb Free Product NCE3010S Normalized BVdss C Capacitance (pF) http://www.ncepower.com TJ-Junction Temperature(℃) Vds Drain-Source Voltage (V) Figure 9 BVDSS vs Junction Temperature Vth (V) Variance ID- Drain Current (A) Figure 7 Capacitance vs Vds TJ-Junction Temperature(℃) Vds Drain-Source Voltage (V) Safe Operation Area Figure 10 VGS(th) vs Junction Temperatur r(t),Normalized Effective Transient Thermal Impedance Figure 8 Square Wave Pluse Duration(sec) Figure 11 Normalized Maximum Transient Thermal Impedance Wuxi NCE Power Semiconductor Co., Ltd Page 5 v1.0 Pb Free Product http://www.ncepower.com NCE3010S SOP-8 PACKAGE IN FORMATION Wuxi NCE Power Semiconductor Co., Ltd Page 6 v1.0 Pb Free Product http://www.ncepower.com NCE3010S ATTENTION: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all NCE power products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your NCE power representative nearest you before using any NCE power products described or contained herein in such applications. NCE power assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE power products described or contained herein. Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all NCE power products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE power Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power product that you intend to use. This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice. Wuxi NCE Power Semiconductor Co., Ltd Page 7 v1.0