NHD‐5.7‐320240WFB‐CTXI#‐1 TFT (Thin‐Film‐Transistor) Color Liquid Crystal Display Module NHD‐ 5.7‐ 320240‐ WFB‐ C‐ T‐ X‐ I‐ #‐1 Newhaven Display 5.7” Diagonal 320xRGBx240 pixels Model Built‐in driver + Controller White LED backlight TFT 6:00 view, Wide Temp RoHS Compliant Newhaven Display International, Inc. 2511 Technology Drive, Suite 101 Elgin IL, 60124 Ph: 847‐844‐8795 Fax: 847‐844‐8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 2 3 4 Date 7/8/2009 7/29/2009 11/4/2009 3/26/2009 4/16/2010 Functions and Features • • • • 320xRGBx240 resolution LED backlight 8‐bit parallel interface SSD1963 Controller Description Initial Release MECHANICAL DRAWING UPDATE Quality Information Update Pin Description Update Updated the Recommended LCD Connector Changed by CL CL BE MP MC Mechanical Drawing NHD‐5.7‐320240WFB‐CTXI#‐1 Pin Description Pin No. Symbol 1 2 3 4 5 6 7‐14 15 16 17 18 19 20 GND VCC NC D/C# WR# RD# [DB0‐DB7] CS# RES# NC R/L U/D NC External Connection Power Supply Power Supply ‐ MPU MPU MPU MPU MPU MPU ‐ ‐ ‐ ‐ Function Description Ground Power supply for LCD and logic (3.3V) No Connect Register Select signal: 1= Data, 0=Command Active LOW Write signal, 8080 MPU interface Active LOW Read signal, 8080 MPU interface Bi‐directional data bus lines Active LOW Chip Select signal Active LOW Reset signal No Connect Scan direction 1: Right (Tied internally) Scan direction 0: Down (Tied internally) No Connect Recommended LCD connector: 1.0mm pitch 20‐Conductor FFC. Molex 52271‐2079 Backlight connector: JST p/n: XHP‐3 Mates with: JST p/n: S3B‐XH‐SM3‐TB Controller Information Built‐in SSD1963 controller. Please download specification at http://www.newhavendisplay.com/app_notes/SSD1963.pdf 8080 Mode Interface: The 8080 mode MPU interface consists of CS#, D/C, RD#, WR#, and DB[7:0]. This interface uses WR# to define a write cycle and RD# to define a read cycle. If the WR# goes LOW when the CS# signal is LOW, the data or command will be latched into the system at the rising edge of WR#. Similarly, the read cycle will start when RD# goes LOW and end at the rising edge of RD#. See the SSD1963 datasheet for detailed timing diagrams. Command Instructions: See the SSD1963 datasheet for the Instruction Table and Command Descriptions. Pixel Data Format: Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Backlight Supply Current Backlight Supply Voltage Backlight Lifetime Symbol Top Tst VCC ICC IB VBL Condition Absolute Max Absolute Max Min. ‐20 ‐30 3.0 VCC=3.3 9.9 10,000 Typ. ‐ ‐ 3.3 121 140 10.2 Max. +70 +80 3.6 210 10.5 Unit ⁰C ⁰C V mA mA V Hr Max. Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms ms Backlight is 7 Parallel groups of 3‐Serial LEDs each. Optical Characteristics Item Viewing Angle – Top Viewing Angle – Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time (rise) Response Time (fall) Symbol Cr YL Tr Tf Condition Cr ≥ 10 Cr ≥ 10 Cr ≥ 10 Cr ≥ 10 ‐ ‐ Min. 40 45 50 50 300 200 ‐ ‐ Typ. 50 55 60 60 400 250 10 15 Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Endurance test applying electric static discharge. Test Condition 2 ‐30⁰C , 240hrs 1,2 +70⁰C 240hrs 2 ‐20⁰C , 240hrs 1,2 +60⁰C , 90% RH , 240hrs 1,2 ‐20⁰C,30min ‐> 25⁰C,5min ‐> 70⁰C,30min = 1 cycle 10 cycles 10‐55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms Note +80⁰C , 240hrs 3