Calibration Accuracy ni.com/calibration | Traceability | Documentation Calibration Made Simple As a manufacturer of high-accuracy measurement products, National Instruments understands the need to maintain properly calibrated equipment. Calibration is the comparison of an instrument’s actual measurement performance to a standard of known accuracy. With calibration, you can achieve the following: ■■ ■■ Ensure accurate measurements Trace measurements back to known and accepted standards ■■ Increase production yields ■■ Meet quality program requirements such as ISO 9001 ■■ Provide a basis for comparing measurements between different users Critical for maintaining performance and accuracy, calibration can be performed on a wide range of instruments. Calibration Intervals Self-Calibration The accuracy of the electronic components of all instruments drifts over time, with factors such as time in service and environmental conditions contributing. Devices are designed and tested so this error is noted in accuracy specifications, but after a defined length of time called the calibration interval, most manufacturers no longer specify the measurement accuracy. To maintain specified measurement performance, instruments must be calibrated at regular intervals as defined by the manufacturer. Self-calibration, or internal calibration, uses onboard signal references to adjust measurement accuracy. During self-calibration, the instrument measures the onboard references and adjusts its measured performance to account for changes due to environmental effects such as temperature. The adjustment of measured values during self-calibration does not account for the drift of the onboard signal reference and does not replace the need for external calibration. Performing regular external calibration helps ensure the onboard reference signals are accurate and maximizes overall measurement performance. External Calibration Error 0.01% 24 Hours 90 Days 1 Year ? Time System Calibration System calibration, the most comprehensive method of calibration, quantifies and compensates for the total measurement error in a system. By applying known inputs and reviewing the resulting measurement, you can develop a model that represents the error of the system and compensate for this error by applying correction coefficients to your measured data. -0.01% Accuracy Specifications For most computer-based data acquisition and instrumentation hardware, NI supplies graduated accuracy tables. ni.com/calibration There are a number of reasons to send an instrument to the manufacturer or a suitable metrology laboratory for external calibration, including when you need to verify performance, when the calibration interval has expired or your predefined service time has elapsed, when the instrument has been operated in an extreme environment, or when measurements appear questionable. External calibration includes verification of the instrument’s capabilities and provides for adjustments to measurement circuitry and onboard signal references if needed. Typically, a calibration certificate is issued verifying the instrument’s measurement performance at the time of calibration. Computer-based data acquisition and instrumentation hardware is ideal for this type of compensation because you can quickly and easily apply your correction in software. System calibration does not completely replace the need to perform external calibration on individual system components in order to meet the requirements of quality programs. ni.com/calibration The Importance of Traceability One of the most basic requirements of calibration is proof of traceability, an unbroken chain of comparisons between an instrument’s measurement and a known standard. Because these well-quantified standards are maintained by national and international organizations, they provide a reference for all traceable measurements. Traceability between your measurements and these standards provides the following advantages: ■■ The ability to trace your measurement uncertainty back to an accepted standard ■■ Acceptance of your instrument’s measurement capabilities between countries ■■ Ability to determine the maximum uncertainty of your measurements ■■ Correlation between your measurements and those of other traceable entities NI provides a full range of calibration services. Traceability is defined at a number of levels. The Bureau International des Poids et Mesures (BIPM) ensures worldwide uniformity of measurements and their traceability to the International System of Units (SI). It does this with the authority of the Convention of the Metre, a diplomatic treaty among member nations. The BIPM also participates in and organizes international comparisons of national measurement standards, as well as conducts calibrations for member states. NI Traceability International System of Units (SI) Germany (PTB) USA (NIST) Singapore (NMC) China (NIM) DKD Metrology Laboratories ACLASS ESZ Davis Calibration SAC SINGLAS ST Electronics East China National Centre of Metrology SIMT National Instruments Tracing your instruments’ accuracy to known standards is a critical part of calibration. ni.com/calibration Japan (NIMJ AIST) Calibration and the NI Hardware Advantage National Instruments computer-based data acquisition and instrumentation hardware is calibrated at the factory to ensure measurement accuracy and to verify that the devices meet published specifications. Accreditation Services Manufacturing Facilities Finally, each country has accreditation institutes that audit and accredit local metrology laboratories to the standards set forth by their NMI. In Europe, many of these accreditation institutes participate in the EA Multilateral Agreement (MLA) to ensure that accreditations in one country are acceptable in others. Bureau International des Poids et Mesures (BIPM) National Metrology Authorities Further down the chain, at the national level, each country has different legal metrology authorities. These bodies follow the guidelines defined by the BIPM and its associated committees to provide quality measurement standards for their associated countries. The National Metrology Institute (NMI) of each member state of the Convention of the Metre also participates in the Mutual Recognition Agreement (MRA). This document provides, among other things, a mutual recognition of calibration and measurement certificates issued by NMI. JNLA TRT NI products calibrated at the time of manufacture are traceable to international standards such as the National Institute of Standards and Technologies (NIST) in the Americas and the Physikalisch-Technische Bundesanstalt (PTB) in Europe. By performing calibration traceable to these standards, NI can help ensure that measurements taken in one country are accepted in all other participating countries. With this calibration, NI provides a certificate of calibration recognized in all countries as documented proof that the hardware meets published specifications. To maintain maximum measurement performance, NI can recalibrate your NI products to meet factory specifications. Unlike traditional box instruments, computer-based hardware uses software applications that you create to define your measurement functionality. In this way, you can easily add error compensation and automate system calibration in your application software. By regularly calibrating your NI hardware and taking advantage of the flexibility that comes with software-defined instruments, you can maintain unquestionable measurement performance. ni.com/calibration NI Calibration Certification To help meet your calibration needs, National Instruments provides calibration support and services. These options include product recalibration services, manual calibration procedures, and automated calibration software specifically designed for metrology laboratory use. Used as part of your complete calibration solution, these offerings can help you ensure the accuracy of your instruments. NI Calibration Service National Instruments offers two service options for maintaining your instrument’s measurement performance: Basic and Detailed Calibration. You can obtain these services for your instrument at the time of purchase, or anytime after, to maintain the instrument’s performance. NI offers calibration solutions for all of your instrumentation, even hardware for other companies. After the calibration interval expires, you can return your products to NI for recalibration. To order recalibration, contact National Instruments to obtain a calibration Return Merchandise Authorization (RMA) number and specify the type of calibration service when you order. Basic Calibration Through independent calibration service providers, you can obtain additional NI product calibration services such as express calibration service, on-site calibration services, and calibration for all of your measurement hardware including instrumentation products that are not from NI. NI offers a Basic Calibration certificate with all new measurement products at no charge to you. This certificate states that the product is calibrated and provides traceability to internationally accepted standards, which can help you meet the requirements of quality standards programs such as ISO 9001. Detailed Calibration If your quality requirements state that you need more than a Basic Calibration certificate, NI offers Detailed Calibration service. Detailed Calibration certificates from NI contain detailed measurement data to help you meet the requirements of even more stringent internationally accepted quality standards. NI offers Detailed Calibration certificates for purchase at the time you acquire your measurement hardware. Manual Calibration Procedures To support more advanced metrology laboratories, NI provides access to manual calibration procedures, which offer detailed step-by-step instructions for verifying and adjusting the performance of NI products during calibration. These documents also define the required calibration standards, software functions, and test specifications used during the calibration. NI Calibration Executive Using manual calibration procedures can be slow and can require software development to adjust measurement hardware. For users and laboratories that do not have the time or expertise to develop their own calibration software, NI provides a turnkey calibration application – NI Calibration Executive. NI Calibration Executive, which was developed primarily for metrology laboratories, automates the verification and adjustment of your NI products. By using NI Calibration Executive, you can easily automate your calibration operations and benefit from NI technology such as NI-VISA universal I/O interface software, IVI drivers, and NI TestStand and LabVIEW software. NI Calibration Executive: ■■ Externally calibrates most NI measurement devices ■■ Operates in automatic or manual mode through an intuitive user interface ■■ Automatically configures and controls calibration instruments ■■ Stores calibration reports in an ODBC-compliant database ■■ Provides convenient connections through hardware calibration fixtures NI Calibration Services ni.com/calibration ni.com/calibration NI Global Services and Support National Instruments offers extensive services and support solutions to help you achieve long-term success. Take advantage of product and professional services, training, and certification programs to meet your needs during each phase of the application life cycle – from planning and development through deployment and ongoing maintenance. Visit ni.com/services for more information. Professional Services The NI professional services team, comprising NI engineers and worldwide National Instruments Alliance Partners, can help you with prototyping, feasibility analysis, consulting, and systems integration. Visit ni.com/services for more information. Software Maintenance and Support Visit ni.com/ssp to learn how, as a National Instruments Standard Service Program (SSP) member, you can receive free software upgrades and maintenance releases, direct mail and phone support from NI applications engineers, and access to exclusive software training modules. Hardware Services Make the most of your hardware investment by using NI hardware services including flexible and renewable extended warranties, time-critical repair services, and hardware recalibration options. Visit ni.com/services for more information. Training and Certification The NI training and certification program is the most effective way to increase application development proficiency and productivity using NI software and hardware. Visit ni.com/training for more information. Volume Licensing Designed for organizations with five or more licenses of the same software program, the Volume License Program features services such as centralized license management, flexible budget purchasing, customized on-site training, and more. Visit ni.com/vlp for more information. Ordering Information NI Calibration Executive .......................................................................................................................... 777608-02 NI Calibration Executive hardware adapter for NI E Series, M Series, and S Series devices . ................ 778056-03 NI Calibration Executive hardware adapter for NI 435x devices ............................................................. 778031-03 NI FP-TB-CAL calibration base for FieldPoint .......................................................................................... 777519-90 NI cFP-CAL calibration backplane for Compact FieldPoint ...................................................................... 779646-01 Visit ni.com/calibration for a current list of applicable products, calibration services part numbers, and pricing. U.S. Corporate Headquarters 866 463 5417 Worldwide Offices (Please note that these phone numbers do not include their respective country codes): Andean and Caribbean 212 503 5310 Argentina 0800 666 0037 Australia 0 2 9491 4000 Austria 0 662 457990 0 Belgium 0 2 757 0020 Brazil 011 3149 3149 Canada 450 510 3056 Chile 0 800 532 951 China 0 21 5050 9800 Colombia 01 800 913 3092 Costa Rica 0 800 052 1749 Czech Republic, Slovakia 420 224 235 774 Denmark 45 76 26 00 Dominican Republic 800 433 3488 Ecuador 1800 999119 (pedir enlace a 1 800 433 3488) El Salvador 800 6271 Finland 0 9 725 72511 France (0) 8 20 20 04 14 Germany 0 89 7413130 Guatemala 2450 1685 Honduras 0 504 3646 Hungary 36 23 448 900 India 0 80 41190000 Ireland 0 1867 4374 Israel 0 972 3 6393737 Italy 02 41309277 Japan 0120 527196 Korea 0 2 3451 3400 Lebanon 0 1 33 28 28 Malaysia 1800 887710 Mexico 01 800 010 0793 Netherlands 0 348 433 466 New Zealand 0800 553 322 Norway 66 90 76 60 Panama 008000 521166 Peru 0 800 50614 Philippines 2 659 1722 Poland 0 22 3289010 Portugal 210 311 210 Puerto Rico 1 800 433 3488 Russia 7 495 783 6851 Singapore 1800 226 5886 Slovenia, Croatia, Bosnia and Herzegovina, Serbia, Montenegro, Macedonia 3 425 42 00 South Africa 0 11 805 8197 Spain 91 640 0085 Sweden 0 8 587 895 00 Switzerland 0 56 2005151 Taiwan 2 2377 2222 Thailand 0 2 278 6777 Turkey 0 212 279 3031 Uruguay 0004 055 114 U.K. 0 1635 523545 Venezuela 0 212 503 5310 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n ©2009 National Instruments. All rights reserved. FieldPoint, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, and NI TestStand are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 2009-10627-911-101-D