High-Value Embedded Controllers for PXI Express NI PXIe-8101, NI PXIe-8102 NEW! ◾◾ 2.0 GHz single-core for NI PXIe-8101, 1.9 GHz dual-core for NI PXIe-8102 ◾◾ 1 GB (1 x 1 GB DIMM) 800 MHz DDR2 RAM standard, 4 GB (1 x 4 GB DIMMs) maximum ◾◾ 80 GB integrated hard drive standard ◾◾ 10/100/1000BASE-TX Ethernet ◾◾ Up to 1 GB/s maximum system bandwidth and 250 MB/s maximum slot bandwidth (four x1 PCI Express links) ◾◾ 2 Hi-Speed USB ports ◾◾ DVI-I video connector ◾◾ IEEE 1284 ECP/EPP parallel port ◾◾ RS232 serial port ◾◾ Internal PXI trigger bus routing ◾◾ Watchdog timer Software ◾◾ OS and drivers already installed ◾◾ Hard-drive-based image recovery PXI System Configuration ◾◾ Complete PXI system configuration at ni.com/pxiadvisor Overview available for measurement and control modules. This rugged one-piece controller design minimizes integration issues and eliminates the need for complex cabling The NI PXIe-8101 and PXIe-8102 are high-value embedded controllers to daughter boards. The NI PXIe-8102 block diagram is shown in Figure 2. designed for use in PXI Express and CompactPCI Express systems. The NI PXIe-8102 features a dual-core 1.9 GHz Intel Celeron T3100 processor, and the NI PXIe-8101 includes a single-core 2.0 GHz Intel Celeron 575 CPU processor. Integrating these controllers into a PXI Express chassis, such as CPU frequency the NI PXIe-1062 or PXIe-1082, provides a compact, high-value platform CPU cores that delivers up to 1 GB/s of total system bandwidth and up to 250 GB/s of Front-side bus single-slot bandwidth. This combination of high system and slot bandwidth, PCI Express bandwidth the latest Intel processors, and a lower price point makes these controllers L2 cache ideal for value-based test, measurement, and control applications. Dual-channel 800 MHz DDR2 RAM, standard Dual-channel 800 MHz DDR2 RAM, maximum Hard drive (standard option), minimum NI PXIe-8106 (with 1 GB RAM) 117 NI PXIe-8102 105 NI PXIe-8101 80 0 20 40 60 80 100 120 140 Intel processor and all standard and extended PC I/O ports into a single unit. By integrating many I/O ports on the controller, all active slots in the chassis remain 2.0 GHz 1.9 GHz 1 2 667 MHz 800 MHz Four x1 PCI Express Gen1 1 MB 1 GB (1 x 1 GB) 4 GB (1 x 4 GB) 80 GB SATA (5400 rpm) 4 Serial port (RS232) 4 Parallel port 4 Hi-Speed USB ports 2 Watchdog/trigger SMB 4 Installed OS Windows Vista Business, Windows Vista Business (Downgraded to Windows XP Professional)1 Contact National Instruments or visit ni.com/pxiadvisor for information on other available operating systems. 1 With state-of-the-art packaging, the NI PXIe-8101 and PXIe-8102 integrate NI PXIe-8102 Intel Celeron T3100 10/100/1000BASE-TX (Gigabit) Ethernet Figure 1. Embedded Controller Benchmarks Hardware NI PXIe-8101 Intel Celeron 575 Table 1. NI PXIe-8101 and PXIe-8102 Features High-Value Embedded Controllers for PXI Express Video Socket 479 CPU The NI PXIe-8101 and PXIe-8102 include a Mobile Intel GM45 Express Chipset (Graphics and Memory Controller Hub) that has an integrated graphics processing unit. It delivers intense, realistic 3D graphics with sharp images, fast SO-DIMM DDR2 SDRAM PC2-6400 Single CH Chipset Graphics Memory Controller Hub rendering, smooth motion, and high detail, without the need for an additional video card or peripheral. This unique architecture provides balanced memory DVI-I Connector usage between graphics and the system for optimal performance. Additionally, the NI PXIe-8101 and PXIe-8102 feature a DVI-I video connector that is compatible with digital (DVI) and analog video (VGA) monitors. A DVI-I to VGA DMI Flash ROM Chipset I/O Controller Hub 2 Hi-Speed USB Connectors adapter is included with the controller for use with VGA monitors. x1 PCIE x1 PCIE x1 PCIE x1 PCIE PXIe Connector PXI Trigger SATA LPC Bus Gigabit Ethernet Super I/O COM 1 The DVI-I video port on the NI PXIe-8101 and PXIe-8102 is capable of supporting simultaneous DVI and VGA output. With this built-in capability, you can connect a digital and an analog monitor to your PXI system at the same time with SMB to PXI Trigger LPT 1 Dual Monitor Support Watchdog Timer independent displays. This negates the need for a separate PXI or CompactPCI video module to connect two monitors to your PXI system. A DVI-I (male) to DVI-D (female) and VGA (female) splitter is required for connecting the two monitors. Hard-Drive-Based Recovery Image SMB Figure 2. NI PXIe-8102 Block Diagram Peripheral I/O The NI PXIe-8101 and PXIe-8102 include high-performance peripheral I/O such as 10/100/1000BASE-TX (Gigabit) Ethernet and two Hi-Speed USB ports for connection to a keyboard, mouse, CD-ROM/DVD-ROM drive for software installation, or other standard PC peripherals such as speakers, printers, or memory sticks. Use the IEEE 1284 ECP/EPP parallel port to connect to a wide variety of devices, including tape backup drives, printers, and scanners. An RS232 port is available for connecting to serial devices. Memory The NI PXIe-8101 and PXIe-8102 use 800 MHz DDR2 SDRAM, which makes these controllers ideal for data-intensive applications requiring significant analysis. They have a single SO-DIMM socket for the DDR2 SDRAM. 1 GB (1 x 1 GB DIMM) of RAM is standard with upgrade options to 4 GB. NI PXIe-8101 and PXIe-8102 embedded controllers are shipped with a factory image of the software installation stored on a separate partition of their hard drives. In the case of software corruption, you can invoke a recovery tool during the controllers’ boot-up process that can use this backup image to restore the controllers to their shipping software configurations. You also can use this recovery tool to create custom images that you can store on external mass storage devices such as a USB memory stick, USB hard drives, and USB CD/DVD drives. With this ability, you can create custom backup images that you can use to either recover the specific embedded controller or replicate the installation on other similar controllers. For more information on this tool, refer to KnowledgeBase 2ZKC02OK. Software The NI PXIe-8101 and PXIe-8102 come with the following minimum set of software already installed: ◾◾ Microsoft Windows OS (contact National Instruments or visit ni.com/pxiadvisor for a list of available Microsoft OSs and for localized versions) ◾◾ NI-VISA and NI-488.2 drivers ◾◾ Drivers for all built-in I/O ports (Table 1) BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 2 High-Value Embedded Controllers for PXI Express System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software reinstalled. When you order your system with the standard program, you also receive systemspecific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system. Ordering Information To order a complete PXI system based on a LabVIEW Real-Time embedded controller, visit ni.com/pxiadvisor. Step 1. Select controller model. NI PXIe-8101................................................................................... 781182-xx NI PXIe-8102................................................................................... 781184-xx Step 2. Replace “xx” to select installed OS. Windows Vista Business (English)............................................................ -02 Windows Vista – downgraded to Windows XP Professional (English)...................................................-01 Localized Windows XP or Other OS1..........................................................-00 Contact National Instruments or visit ni.com/pxiadvisor for the latest operating systems. 1 Step 3. Memory upgrades – select the amount of upgrade memory. Standard: 1 GB MB (1 x 1 GB DIMM) Recommended upgraded memory configurations: 2 GB (1 x 2 GB DIMM must be purchased) 4 GB (1 x 4 GB DIMM must be purchased) 2 GB DDR2 RAM.........................................................................780446-2048 4 GB DDR2 RAM.........................................................................780446-4096 Step 4. Select Accessories.2 80 GB (or greater) 2.5 in. SATA HDD spare/replacement...............779175-03 32 GB 2.5 in. SATA solid-state hard-drive upgrade........................779175-08 250 GB (or greater) 2.5 in. SATA hard-drive upgrade.....................779175-06 DVI-I (male) to DVI-D (female) and VGA (female) splitter..............780868-01 USB-to-dual-PS/2 keyboard/mouse adapter cable........................778713-02 External USB CD-ROM/DVD-ROM drive.........................................778492-01 External USB floppy drive...............................................................778492-02 USB English keyboard and optical mouse......................................779660-01 Parallel port adapter cable (6 in.)...................................................777169-01 NI MKD-1117 (rack-mount 1U LCD monitor, keyboard, mouse drawer)......................................................779872-01 NI FPM-1019 (19 in. flat panel monitor).........................................781002-01 NI FPM-1017 (17 in. flat panel monitor).........................................779559-01 NI FPT-1015 (flat panel touch screen with VGA interface and USB)................................................779560-01 F or additional peripheral I/O modules, including serial, IEEE 1394, and SCSI, visit ni.com/pxiadvisor. 2 BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/pxi. BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 3 High-Value Embedded Controllers for PXI Express Specifications Physical Specifications subject to change without notice. Board dimensions.................................. 2-slot 3U PXI module Features Processor 4.0 by 13 by 21.6 cm (1.59 by 5.1 by 8.5 in.) Slot requirements.................................. One system slot plus three NI PXIe-8101...................................... Intel Celeron 575 2.0 GHz NI PXIe-8102...................................... Intel Celeron T3100 1.9 GHz (dual-core) Chipset................................................... Mobile Intel GM45 Express Chipset Front-Side Bus controller expansion slots Compatibility.......................................... Fully compatible with PXI Specification Weight.................................................... 0.645 kg (1.42 lb) typical NI PXIe-8101...................................... 667 MHz Environment NI PXIe-8102...................................... 800 MHz Maximum altitude.................................. 2,000 m (800 mbar) System Memory (RAM) Standard............................................ 1 GB 800 MHz DDR2 RAM PC2 6400 Pollution degree..................................... 2 Maximum........................................... 4 GB 800 MHz DDR2 RAM PC2 6400 Indoor use only. Hard Drive.............................................. 80 GB minimum, 5400 rpm, internal 2.5 in., 9.5 mm Serial ATA interface (at 25 °C ambient temperature) Operating Environment PXI Express 4 Link Configuration........... x1, x1, x1, x1 Ambient temperature range1................. 5 to 50 °C1 Video...................................................... Integrated Graphics (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) (Mobile Intel GM45 Express Chipset) Serial...................................................... 1 (RS232) Relative humidity range......................... 10 to 90% noncondensing (tested in Parallel................................................... IEEE 1284 Type C miniature connector (adapter cable not included) Hi-Speed USB........................................ 2 accordance with IEC-60068-2-56) Processor should not throttle CPU frequency under reasonable, worst case processor workloads in high operating temperatures. 1 PXI Trigger Bus Input/Output................. Yes Storage Environment Installed Operating System................... Windows Vista Business, Ambient temperature range.................. -40 to 65 °C (tested in accordance Windows Vista Business downgraded to Windows XP Professional Relative humidity range......................... 5 to 95% noncondensing (tested in with IEC-60068-2-1 and IEC-60068-2-2) Power Requirements accordance with IEC-60068-2-56) Shock and Vibration Current (A) Typical Operating shock..................................... 30 g peak, half-sine, 11 ms pulse Maximum Voltage (V) NI PXIe-8101 NI PXIe-8102 NI PXIe-8101 NI PXIe-8102 (tested in accordance with +3.3 2.25 2.25 4.75 4.75 IEC-60068-2-27; test profile developed in accordance with MIL-PRF-28800F) +5 1.25 1.25 2.25 2.25 +12 1.50 1.75 2.25 2.50 Random Vibration -12 0.00 0.00 0.00 0.00 Operating........................................... 5 to 500 Hz, 0.3 grms +5 Aux .330 .330 .400 .400 (with solid-state hard drive) Nonoperating..................................... 5 to 500 Hz, 2.4 grms (tested in accordance with IEC-60068-2-64; nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3) BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 4 High-Value Embedded Controllers for PXI Express Safety Compliance ◾◾ IEC 61010-1, EN 61010-1 ◾◾ UL 61010-01, CSA 61010-1 Electromagnetic Compatibility ◾◾ EN 61326 (IEC 61326): Class A emissions; Basic immunity ◾◾ EN 55011 (CISPR 11): Group 1, Class A emissions ◾◾ AS/NZS CISPR 11: Group 1, Class A emissions ◾◾ FCC 47 CFR Part 15B: Class A emissions ◾◾ ICES-001: Class A emissions CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows: ◾◾ 2006/95/EC; Low-Voltage Directive (safety) ◾◾ 2004/108/EC; Electromagnetic Compatibility Directive (EMC) Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 5 NI Services and Support your needs around the globe and through PL AN MA IN NI has the services and support to meet IN TA the application life cycle – from planning and development through deployment and SERVICE NEEDS ongoing maintenance. We offer services P DE EL OP and service levels to meet customer LO Y requirements in research, design, validation, V DE and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Training and Certification Visit ni.com/ssp. NI training is the fastest, most certain route to productivity with our products. Hardware Services NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led System Assurance Programs courses in cities worldwide, or we can hold a course at your facility. We also NI system assurance programs are designed to make it even easier for you offer a professional certification program that identifies individuals who have to own an NI system. These programs include configuration and deployment high levels of skill and knowledge on using NI products. services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic Visit ni.com/training. System Assurance Program provides a simple integration test and ensures that Professional Services your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select Our NI Professional Services team is composed of NI applications and systems from available NI system driver sets and application development environments engineers and a worldwide National Instruments Alliance Partner program of to create customized, reorderable software configurations. Your system arrives more than 600 independent consultants and integrators. Services range from fully assembled and tested in one box with your software preinstalled. When start-up assistance to turnkey system you order your system with the standard program, you also receive system- integration. Visit ni.com/alliance. specific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. OEM Support Finally, the standard program reduces the total cost of owning an NI system We offer design-in consulting and product integration assistance if you want to online product advisors at ni.com/advisor to find a system assurance program use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. by providing three years of warranty coverage and calibration service. Use the to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for highaccuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 800 813 3693 National Instruments n [email protected] ©2009 National Instruments. All rights reserved. CompactRIO, FieldPoint, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, NI-488, and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 0080