NJU6215 Series Low Operating Current Fundamental Quartz Crystal Oscillator IC !GENERAL DESCRIPTION The NJU6215 series is a C-MOS quartz crystal oscillator IC realized excellent frequency stability for fundamental (up to 60MHz) oscillation, and consists of an oscillation amplifier, 4-stage divider, 3-state output buffer and a built-in LDO. The operating voltage is from 1.62V to 3.63V, and the LDO holds down the characteristic change of the oscillation amplifier for operating voltage variation, and has been stabilized oscillation frequency. The 4-stage divider generates only one frequency selected of f0,f0/2,f0/4 f0/8 and f0/16 internal circuits is output. The 3-state output buffer is C-MOS compatible of high fan-out. The NJU6215 is suitable for the battery drive application such as cellular phones, because it has achieved low operating current by optimizing the tristate buffer. !PACKAGE OUTLINE !FEATURES "Low Operating Current 1mA typ.@40MHz/1.8V/5pF "Frequency Stability ±1ppm@VDD±10% "Operating Voltage 1.62 to 3.63V "Maximum Oscillation Frequency Up to 50MHz "4-Stage Divider Maximum Divider f0/16 "Built-in LDO "Oscillation Stop and Output Stand-by Function "3-State Output Buffer "Variable Pull-up Resistance on-Die "Oscillation Capacitors Cg and Cg on-Die "Package Outline Die/Wafer "C-MOS Technology !PAD LOCATION !LINE-UP TABLE !COORDINATES Type No. FOUT A f0 *B f0/2 f0/4 NJU6215 *C *D f0/8 *E f0/16 * Under Development Internal Connect Short Open N A B B A 2 B A 4 B A 8 B A 16 !EXAMPLE OF PART NUMBER 1)NJU6212AW-L FOUT=f0, Wafer Thickness=140um 2)NJU6212CC-L FOUT= f0/4, Die Thickness=140um Cg/Cd 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF NJU6215XC-X Die CONT XTI XTO VSS VDD FOUT No Pad Name X Y 1 CONT -189 231 2 XTI -189 77 3 XTO -189 -77 4 VSS -189 -231 5 FOUT 215 -231 6 VDD 222 231 Starting Point: Die Center Unit[um] Die Size: 0.70x0.75mm Die Thickness (C-L): 140±10um Wafer Thickness (W-L): 140±10um Pad size: 90x90um Die Substrate: VSS level 2010/04/28 ( 1 / 7 ) NJU6215 Series !BLOCK DIAGRAM VDD VSS Regulator XTO Rf Level Shifter XTI Cg Cd 1/N Divider A OSC Detector B 3-State Buffer FOUT CONT !TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control CONT FOUT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4,f0/8 and f0/16 Note1) L Oscillation Stop and High impedance Output XTI Quartz Crystal Connecting Terminals XTO VSS VSS=0V : GND FOUT Frequency Output VDD VDD=1.62 to 3.63V Note1) Refer to the line-up table. !ABSOLUTE MAXIMUM RATINGS (VSS=0V, Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN -0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA ±10 Output Current IO mA ±25 Operating Temperature Range Topr -40 to +85 °C Storage Temperature Range Tstg -55 to +125 °C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. 2010/04/28 ( 2 / 7 ) NJU6215 Series !ELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage Output Frequency Stability SYMBOL VDD PARAMETER Operating Current Oscillation Stopping Current SYMBOL IDD Input Voltage Output Voltage Input Current df/f ISTB VIH VIL VOH VOL IIN CONDITIONS MIN 1.62 VDD±10% CONDITIONS A version, f0=50MHz, CL=5pF TYP ±1 MIN (Ta=25°C) UNIT V ppm (VDD=1.8V,Ta=+25°C) TYP MAX UNIT 1.4 1.65 mA CONT=VSS, No load IOH=0.6mA IOL=0.6mA CONT=0.8VDD CONT=0.2VDD MAX 3.63 1.26 0 1.62 1.9 0.1 1 uA 1.8 0.54 V V V V uA uA 0.18 2.7 0.25 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS ±0.1 uA IOZ Current Feedback Resistance Rf 270 kΩ Internal Capacitor Cg fosc=50MHz 9.3 pF Internal Capacitor Cd fosc=50MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 50 MHz Output Signal SYM CL=5pF, @VDD/2 45 50 55 % Symmetry Output Signal Rise 3.2 5.0 ns tr CL=5pF, 0.1VDD to 0.9VDD Time Output Signal Fall 3.2 5.0 ns tf CL=5pF, 0.9VDD to 0.1VDD Time Output Disable time tPOZ CL=5pF, RL=1kΩ 100 ns Output Enable Time tPZO CL=5pF 1 ms Note4) The oscillation frequency range has used NJRC’s standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) 2010/04/28 ( 3 / 7 ) NJU6215 Series PARAMETER Operating Current Oscillation Stopping Current Input Voltage Output Voltage Input Current SYMBOL IDD ISTB VIH VIL VOH VOL IIN CONDITIONS A version, f0=50MHz, CL=5pF MIN (VDD=2.5V,Ta=+25°C) TYP MAX UNIT 1.8 2.3 mA CONT=VSS, No load IOH=0.8mA IOL=0.8mA CONT=0.8VDD CONT=0.2VDD 1.75 0 2.25 4.2 0.3 1 uA 2.5 0.75 V V V V uA uA 0.25 9.0 0.6 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS ±0.1 uA IOZ Current Feedback Resistance Rf 270 kΩ Internal Capacitor Cg fosc=50MHz 9.3 pF Internal Capacitor Cd fosc=50MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 50 MHz Output Signal 45 50 55 % SYM CL=5pF, @VDD/2 Symmetry Output Signal Rise 2.2 3.7 ns tr CL=5pF, 0.1VDD to 0.9VDD Time Output Signal Fall 2.2 3.7 ns tf CL=5pF, 0.9VDD to 0.1VDD Time Output Disable time tPOZ CL=5pF, RL=1kΩ 100 ns Output Enable Time tPZO CL=5pF 1 ms Note4) The oscillation frequency range has used NJRC’s standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) 2010/04/28 ( 4 / 7 ) NJU6215 Series PARAMETER Operating Current Oscillation Stopping Current Input Voltage Output Voltage Input Current SYMBOL IDD ISTB VIH VIL VOH VOL IIN CONDITIONS A version, f0=50MHz, CL=5pF MIN (VDD=3.3V,Ta=+25°C) TYP MAX UNIT 2.4 3.0 mA CONT=VSS, No load IOH=1.2mA IOL=1.2mA CONT=0.8VDD CONT=0.2VDD 2.31 0 2.97 7.8 0.6 1 uA 3.3 0.99 V V V V uA uA 0.33 16.0 1.2 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS ±0.1 uA IOZ Current Feedback Resistance Rf 270 kΩ Internal Capacitor Cg fosc=50MHz 9.3 pF Internal Capacitor Cd fosc=50MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 50 MHz Output Signal 45 50 55 % SYM CL=5pF, @VDD/2 Symmetry Output Signal Rise 1.8 3.0 ns tr CL=5pF, 0.1VDD to 0.9VDD Time Output Signal Fall 1.8 3.0 ns tf CL=5pF, 0.9VDD to 0.1VDD Time Output Disable time tPOZ CL=5pF, RL=1kΩ 100 ns Output Enable Time tPZO CL=5pF 1 ms Note4) The oscillation frequency range has used NJRC’s standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) 2010/04/28 ( 5 / 7 ) NJU6215 Series !EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS L1 C1 R1 f[MHz] 50 R1[Ω] 18.21 L1[mH] 4.34 C1[fF] 2.34 C0[pF] 0.96 C0 !MEASUREMENT CIRCUITS (1)Operating Current, Output Signal Symmetry, Output Signal Rise/Fall Time (CL=5pF) 1/2VDD H VDD L FOUT XTI XTO 0.1uF VSS 90% CL=5pF 50% 10% tr tf (2)Output Disable Time (CL=5pF,RL=1kΩ) XTI RL=1kΩ VDD CONT FOUT XTO Pulse Generator 0.1uF CONTV SS 0.2VDD tPOZ CL=5pF FOUT VOL 50Ω (3)Output Enable Time (CL=5pF) Pulse Generator XTI VDD CONT FOUT 0.8VDD XTO Pulse Generator CONTV SS 50Ω 0.1uF tPZO CL=5pF FOUT VOH 50Ω 2010/04/28 ( 6 / 7 ) NJU6215 Series [CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2010/04/28 ( 7 / 7 )