APTGF75H120TG Full - Bridge NPT IGBT Power Module Application • Welding converters • Switched Mode Power Supplies • Uninterruptible Power Supplies • Motor control VBUS Q3 G3 G1 OUT1 E1 OUT2 E3 Q2 Q4 G2 G4 E2 E4 NTC1 NTC2 0/VBUS G3 G4 E3 E4 VBUS Benefits • Outstanding performance at high frequency operation • Stable temperature behavior • Very rugged • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Solderable terminals both for power and signal for easy PCB mounting • Easy paralleling due to positive TC of VCEsat • Low profile • RoHS compliant OUT2 OUT1 0/VBUS E1 E2 NTC2 G1 G2 NTC1 Features • Non Punch Through (NPT) FAST IGBT - Low voltage drop - Low tail current - Switching frequency up to 50 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • Internal thermistor for temperature monitoring • High level of integration Absolute maximum ratings Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation RBSOA Reverse Bias Safe Operating Area Tc = 25°C Max ratings 1200 100 75 150 ±20 500 Tj = 150°C 150A @ 1200V Tc = 25°C Tc = 80°C Tc = 25°C Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-5 APTGF75H120TG – Rev 1 January, 2006 Q1 VCES = 1200V IC = 75A @ Tc = 80°C APTGF75H120TG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Tf Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Reverse diode ratings and characteristics Symbol Characteristic VRRM IRM Test Conditions Tj = 25°C VGE = 0V VCE = 1200V Tj = 125°C T VGE =15V j = 25°C IC = 75A Tj = 125°C VGE = VCE, IC = 2.5 mA VGE = ±20V, VCE = 0V Min Test Conditions VGE = 0V VCE = 25V f = 1MHz Min IF DC Forward Current VF Diode Forward Voltage Er Reverse Recovery Energy trr Reverse Recovery Time VR=1200V IF = 50A IF = 50A VR = 600V Reverse Recovery Charge Unit µA 3.7 V 6.5 ±500 V nA Max Unit nF ns ns 30 9 mJ 4 Typ Max 1200 di/dt =1500A/µs Qrr Typ 5.1 0.7 0.4 120 50 310 20 Max 130 60 360 Min Maximum Peak Repetitive Reverse Voltage Maximum Reverse Leakage Current 4.5 Inductive Switching (25°C) VGE = 15V VBus = 600V IC = 75A R G = 7.5Ω Inductive Switching (125°C) VGE = 15V VBus = 600V IC = 75A R G = 7.5Ω VGE = ±15V Tj = 125°C VBus = 600V IC = 75A Tj = 125°C R G = 7.5Ω Test Conditions Typ 250 500 3.2 3.9 Unit V Tj = 25°C Tj = 125°C 350 600 µA Tc = 80°C Tj = 25°C Tj = 125°C 50 2.1 1.9 A Tj = 125°C 3 mJ Tj = 25°C 95 Tj = 125°C 190 Tj = 25°C 4.2 Tj = 125°C 9 APT website – http://www.advancedpower.com V ns µC 2-5 APTGF75H120TG – Rev 1 January, 2006 Symbol Characteristic APTGF75H120TG Temperature sensor NTC (see application note APT0406 on www.advancedpower.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K RT = R 25 Max Unit kΩ K Min Typ Max 0.25 0.6 Unit T: Thermistor temperature Thermal and package characteristics VISOL TJ TSTG TC Torque Wt Typ 50 3952 1 1 RT : Thermistor value at T exp B 25 / 85 − T25 T Symbol Characteristic RthJC Min IGBT Diode Junction to Case Thermal resistance RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight To heatsink M5 2500 -40 -40 -40 1.5 °C/W V 150 125 100 4.7 160 °C N.m g ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT website – http://www.advancedpower.com 3-5 APTGF75H120TG – Rev 1 January, 2006 SP4 Package outline (dimensions in mm) APTGF75H120TG Typical Performance Curve Output Characteristics 150 125 125 75 VGE=20V VGE =12V 75 VGE=9V 50 TJ =125°C 25 25 0 0 0 1 2 3 VCE (V) 4 5 6 0 1 2 3 4 V CE (V) 5 6 Energy losses vs Collector Current Transfert Characteristics 150 28 V CE = 600V V GE = 15V RG = 7.5 Ω T J = 125°C 24 125 20 E (mJ) 100 T J=125°C 75 50 Eon 16 12 Eoff 8 T J=25°C 25 4 Er 0 0 5 6 7 8 9 10 11 0 12 25 50 75 100 125 150 IC (A) V GE (V) Switching Energy Losses vs Gate Resistance Reverse Bias Safe Operating Area 35 175 V CE = 600V V GE =15V I C = 75A T J = 125°C 25 20 Eon 150 125 IC (A) 30 E (mJ) VGE=15V 100 50 IC (A) TJ = 125°C T J=25°C 100 IC (A) IC (A) Output Characteristics (VGE=15V) 150 15 10 100 75 VGE=15V T J=125°C RG=7.5 Ω 50 Eoff 25 5 0 0 0 10 20 30 40 50 Gate Resistance (ohms) 60 0 70 300 600 900 1200 1500 V CE (V) maximum Effective Transient Thermal Impedance, Junction to Pulse Duration IGBT 0.25 0.9 0.2 0.7 0.15 0.5 0.1 0.3 0.05 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) APT website – http://www.advancedpower.com 4-5 APTGF75H120TG – Rev 1 January, 2006 Thermal Impedance (°C/W) 0.3 APTGF75H120TG Forward Characteristic of diode 125 ZCS 30 20 10 0 ZVS VCE=600V D=50% RG=7.5 Ω TJ =125°C TC=75°C 100 IC (A) Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 100 90 80 70 60 50 40 hard switching 75 T J=125°C 50 25 T J=25°C 0 0 20 40 60 IC (A) 80 0 100 0.5 1 1.5 VF (V) 2 2.5 3 maximum Effective Transient Thermal Impedance, Junction to Pulse Duration Thermal Impedance (°C/W) 0.7 0.6 0.5 Diode 0.9 0.7 0.4 0.3 0.2 0.1 0.5 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 5-5 APTGF75H120TG – Rev 1 January, 2006 rectangular Pulse Duration (Seconds)