APTGT50SK120TG Buck chopper Fast Trench + Field Stop IGBT® Power Module Application • AC and DC motor control • Switched Mode Power Supplies NTC2 Q1 G1 Features • Fast Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • High level of integration • Internal thermistor for temperature monitoring E1 OUT 0/VBU S SENSE NTC1 0/VBUS SENSE VBUS E1 G1 Benefits • Stable temperature behavior • Very rugged • Solderable terminals for easy PCB mounting • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Easy paralleling due to positive TC of VCEsat • Low profile • RoHS compliant OUT OUT 0/VBUS NTC2 0/VBUS SENSE NTC1 Absolute maximum ratings Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation RBSOA Reverse Bias Safe Operating Area TC = 25°C Max ratings 1200 75 50 100 ±20 277 Tj = 125°C 100A @ 1150V TC = 25°C TC = 80°C TC = 25°C Unit V A November, 2005 0/VBU S V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-5 APTGT50SK120TG– Rev 1 VBUS VCES = 1200V IC = 50A @ Tc = 80°C APTGT50SK120TG All ratings @ Tj = 25°C unless otherwise specified Test Conditions ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter Saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current VGE = 0V, VCE = 1200V Tj = 25°C VGE = 15V IC = 50A Tj = 125°C VGE = VCE , IC = 2mA VGE = 20V, VCE = 0V Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Min Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Test Conditions VGE = 0V VCE = 25V f = 1MHz Min Inductive Switching (25°C) VGE = 15V VBus = 600V IC = 50A R G = 18 Ω Inductive Switching (125°C) VGE = 15V VBus = 600V IC = 50A R G = 18 Ω Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Chopper diode ratings and characteristics Symbol Characteristic VRRM IRM Test Conditions 1.7 2.0 5.8 Typ 3600 190 160 90 30 420 Max Unit 250 2.1 µA 6.5 400 V nA Max Unit pF ns 90 50 520 90 5 5.5 Typ ns mJ Max 1200 VR=1200V IF DC Forward Current VF Diode Forward Voltage IF = 50A trr Reverse Recovery Time IF = 50A VR = 600V Qrr Reverse Recovery Charge di/dt =2000A/µs APT website – http://www.advancedpower.com Unit V Tj = 25°C Tj = 125°C Tc = 80°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C V 70 Min Maximum Peak Repetitive Reverse Voltage Maximum Reverse Leakage Current 5.0 Typ 250 500 50 1.4 1.3 150 250 4.5 9 µA A 1.9 V ns µC November, 2005 Symbol Characteristic 2-5 APTGT50SK120TG– Rev 1 Electrical Characteristics APTGT50SK120TG Temperature sensor NTC (see application note APT0406 on www.advancedpower.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K RT = R 25 Max Unit kΩ K Min Typ Max 0.45 0.58 Unit T: Thermistor temperature Symbol Characteristic VISOL TJ TSTG TC Torque Wt Typ 50 3952 1 1 RT : Thermistor value at T exp B 25 / 85 − T25 T Thermal and package characteristics RthJC Min IGBT Diode Junction to Case Thermal Resistance RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight To Heatsink M5 2500 -40 -40 -40 1.5 °C/W V 150 125 100 4.7 160 °C N.m g ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT website – http://www.advancedpower.com 3-5 APTGT50SK120TG– Rev 1 November, 2005 SP4 Package outline (dimensions in mm) APTGT50SK120TG Typical Performance Curve Output Characteristics (VGE =15V) 100 Output Characteristics 100 TJ = 125°C T J=25°C 80 80 V GE=17V VGE=13V 60 IC (A) IC (A) TJ=125°C 40 40 20 20 0 V GE=15V 60 VGE=9V 0 0 0.5 1 1.5 2 V CE (V) 2.5 3 0 3.5 12 TJ =25°C 8 60 E (mJ) IC (A) VCE = 600V VGE = 15V RG = 18Ω TJ = 125°C 10 TJ =125°C 40 3 4 6 Eon Eon Eoff Er 4 20 2 T J=125°C 0 0 5 6 7 8 9 10 11 0 12 20 Switching Energy Losses vs Gate Resistance 12 8 60 80 100 Reverse Bias Safe Operating Area 120 VCE = 600V VGE =15V IC = 50A TJ = 125°C 10 40 IC (A) V GE (V) Eon 100 80 Eoff 6 4 IC (A) E (mJ) 2 VCE (V) Energy losses vs Collector Current Transfert Characteristics 100 80 1 60 40 Er 2 VGE =15V TJ=125°C RG=18Ω 20 0 0 0 10 20 30 40 50 60 Gate Resistance (ohms) 70 80 0 300 600 900 V CE (V) 1200 1500 maximum Effective Transient Thermal Impedance, Junction to Pulse Duration IGBT 0.9 November, 2005 0.4 0.7 0.3 0.5 0.2 0.1 0.3 0.1 Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) APT website – http://www.advancedpower.com 4-5 APTGT50SK120TG– Rev 1 Thermal Impedance (°C/W) 0.5 APTGT50SK120TG Forward Characteristic of diode 150 70 VCE=600V D=50% RG=18Ω TJ=125°C TC=75°C ZVS 60 50 40 30 125 100 IC (A) Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 80 50 ZCS 20 hard switching 10 TJ=125°C 75 25 TJ=125°C TJ=25°C 0 0 0 10 20 30 40 50 IC (A) 60 70 0 80 0.5 1 1.5 VF (V) 2 2.5 maximum Effective Transient Thermal Impedance, Junction to Pulse Duration Thermal Impedance (°C/W) 0.6 0.9 Diode 0.5 0.7 0.4 0.3 0.2 0.1 0.5 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 5-5 APTGT50SK120TG– Rev 1 November, 2005 rectangular Pulse Duration (Seconds)