Green Polarization Insensitive Fiber Isolator OIXSG Series Product Description Oplink’s Green isolator is based on glass encapsulated micro-optic packaging technology and minimizes back reflection and back scattering in the reverse direction for any state of polarization. The Green Isolator is a low cost model with excellent performance such as low insertion loss, high isolation, high return loss, low polarization dependent loss (PDL) and low polarization mode dispersion (PMD) for dual-stage isolator. Performance Specificationns Specifications OISSG Serie Operating Wavelength Range Insertion Loss [1] 1310 ± 15 or 1480 ± 15 or C-band: 1528 ~ 1564 or L-band: 1570 ~ 1605 Unit Features nm Wide Operating Wavelength Range and Temperature Range Standard PMD < 0.4 - dB Low Insertion Loss Low PMD < 0.45 - dB High Isolation - < 0.5 dB Ultra Low PDL & Option for Ultra Low PMD Isolation (over operating wavelength range, 0~70°C, all SOP) > 20 >35 < 0.06 < 0.08 dB Standard PMD < 0.25 < 0.05 ps Low PMD < 0.05 - ps Polarization Dependent Loss Polarization Mode Dispersion OIDSG Serie Return Loss (Input/Output Ports) Maximum Power Handling Fiber Type Operating Temperature Storage Temperature Package Dimensions [3] Highly Stable & Reliable > 55/50 dB < 500 mW Applications Fiberoptic Amplifiers Corning SMF-28 0 to +70 Epoxy-free Optical Path °C CATV Fiberoptic Links -40 to +85 °C WDM Systems P1: (ø) 5.5 x (L) 34.0, with boot P2: (ø) 5.5 x (L) 34.0, without boot mm Note: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are excluding connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified Fiberoptic Instruments Transmitters and Fiber Lasers Laboratory R&D R03.20080612 Oplink Communications, Inc. Green Polarization Insensitive Fiber Isolator OIXSG Series Mechanical Drawing / Package Dimensions (dimension in mm) P1 Package: P2 Package: 47 ±2mm 34mm 34mm Ø5.5mm 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Ø 5.5mm Ordering Information OI SG Stage Single Stage = S Dual Stage = D 0 Wavelength PMD Options* Fiber Length** 1310 nm= 1310 1480 nm= 1480 1550 nm= 1550 1585 nm= 1585 Standard = S Low PMD = L 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Jacket P1 + 250μm bare fiber = 11 P1 + 900μm loose tube = 12 P2 + 250μm bare fiber = 21 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A *For OIDSG series, the PMD option is ‘S’. For OISSG series, the PMD option is ‘S’ or ‘L’ based on customer’s requirement. **The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20080612 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules