OTS-1HD2DA Optiva Standard, ™ 1 HD-SDI 270/1485 Mbps w/Loopback and 2 Stereo AES/EBU Digital Audio HD-SDI Video and Audio Transmission Video The OTS-1HD2DA provides for the digital transmission of 1 Channel of HD-SDI Video with Loopback and 2 Channels of Stereo AES/EBU Digital Audio, at absolute broadcast quality. System Design Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S ST, LC, SC or FC ST, LC, SC or FC HD Video In HD Video Out HD Video Loopback Out A L E R T S T A T U S AES/EBU Audio In Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1HDT2DAT HD Video Loopback Out Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. AES/EBU Audio Out For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. OTS-1HDR2DAR Features • Uncompressed HD-SDI Video and 2 AES/EBU channels over one fiber • TDM - Single Wavelength • Complies with SMPTE 292 for uncompressed HD-SDI Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications The Optiva™ bandwidth requirement of this system is 1894 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit** Receive** 1310 Multimode 1310 Singlemode 1310 Singlemode (D ) 1310 Singlemode (DFB) 1550 Singlemode (DFB) 1270-1610 SM (CWDM) OTS-1HDT2DAT-B1-XX-IC OTS-1HDT2DAT-B1-XX-IC OTS-1HDT2DAT-B2D-XX-IC OTS-1HDT2DAT-B3-XX-IC OTS-1HDT2DAT-B3D-XX-IC OTS-1HDT2DAT-L4-XX-IC OTS-1HDR2DAR-B1-XX-IC OTS-1HDR2DAR-B1-XX-IC OTS-1HDR2DAR-B2D-XX-IC OTS-1HDR2DAR-B3-XX-IC OTS-1HDR2DAR-B3D-XX-IC OTS-1HDR2DAR-L4-XX-IC Non-Optical Version OTS-1HDT2DAT-NOC-IC OTS-1HDR2DAR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 7 12 17 25 Varies 1.5 10 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological Test Code Nominal Bit Rate Bit error rate Connector Audio Digital Format Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable SMPTE 292 & 259 RP-178 1.485 Gbps; 270 Mbps 10-14 BNC (IEC 60169-8 Gold Plated) Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data AES/EBU AES3-1992 (ANSI S4,40) SMPTE 276M Micro DB25 RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms (Audio <10ms) LED Status Indication 11 oz Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA Sample Configuration