OTS-1V2ATR1DTR Optiva™ Standard, 1 Composite Video, 2 Duplex Analog Audio and 1 Duplex RS-232/422/485 Data Composite Video, Audio and Serial Data Transmission Video The OTS-1V2ATR1DTR provides for the digital transmission of 1 Channel of Composite Video, 2 Channels of Duplex Analog Audio and 1 Channel of Duplex Serial Data. 2 Analog Audio In/Out System Design Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S Serial Data In/Out Composite Video In 2 Analog Audio Out/In Serial Data Out/In A L E R T S T A T U S Composite Video Out ST, Dual LC, SC or FC ST, Dual LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1VT2ATR1DTR Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. OTS-1VR2ART1DRT Features • Composite Video, Analog Audio and Serial Data • 10-Bit Digital Transmission • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications The Optiva™ bandwidth requirement of this system is 370 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1VT2ATR1DTR-A1/A3M-XX-IC OTS-1VT2ATR1DTR-A2/A3-XX-IC OTS-1VT2ATR1DTR-A2/A3D-XX-IC OTS-1VT2ATR1DTR-A2/A3H-XX-IC OTS-1VT2ATR1DTR-L4/L4-XX-IC OTS-1VR2ATR1DRT-A3M/A1-XX-IC OTS-1VR2ATR1DRT-A3/A2-XX-IC OTS-1VR2ATR1DRT-A3D/A2-XX-IC OTS-1VR2ATR1DRT-A3H/A2-XX-IC OTS-1VR2ATR1DRT-L4/L4-XX-IC Non-Optical Version OTS-1VT2ATR1DTR-NOC-IC OTS-1VR2ATR1DRT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, Dual LC or SC ST, FC, Dual LC or SC ST, FC, Dual LC or SC ST, FC, Dual LC or SC ST, FC, Dual LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm; "ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z. Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, Dual LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Compatibility Signal to Noise Ratio Connector Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure Data Rate SMPTE 170M; RS-250C 10-Bit Processing; 10-Bit Transmission 1.0 Volt p-p 5.5 MHz < 1% < 0.7° NTSC, PAL > 67 dB BNC (IEC 60169-8) 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 24-bit Micro DB25 Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Optiva™™Configurable Multi-Signal Optiva Transmission Platform Platform Communication Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy Redundancy & Micro DB25 Passive Multiplexing Multiplexing Passive Solutions Solutions DC to 1 Mbps DC to 1 Mbps Enclosures, Racks Racks Enclosures, & Frames & Frames DC to 1 Mbps Power Supplies Supplies Power and Accessories & Accessories DC to 1 Mbps General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Sample Configuration Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms (Audio <10ms)) 11 oz LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA