OTS-1HD1ETR Optiva Standard, ™ 1 HD-SDI 270/1485 Mbps w/Loopback and 1 Duplex 10/100 Mbps Ethernet HD-SDI Video and Ethernet Transmission Video The OTS-1HD1ETR provides for the digital transmission of 1 Channel of HD-SDI Video with Loopback and 1 Channel of Duplex 10/100 Ethernet , at absolute broadcast quality. System Design Audio Data Ethernet All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S Ethernet Data In Ethernet Data Out HD-SDI Video In HD-SDI Video Out HD Video Loopback Out A L E R T S T A T U S ST, LC, SC or FC HD Video Loopback Out ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1HDT1ETR OTS-1HDR1ERT Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Features • Uncompressed HD-SDI Video over one fiber • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications The Optiva™ bandwidth requirement of this system is 2,056 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** 1310/1550 Multimode OTS-1HDT1ETR-B1/B3M-XX-IC 1310/1550 Singlemode OTS-1HDT1ETR-B2/B3-XX-IC 1310/1550 Singlemode (D) OTS-1HDT1ETR-B2/B3D-XX-IC 1310/1550 Singlemode (H) OTS-1HDT1ETR-B2/B3H-XX-IC 1270-1610 SM (CWDM) OTS-1HDT1ETR-L4/L4-XX-IC Non-Optical Version OTS-1HDT2DTR-NOC-IC Receive/Transmit** OTS-1HDR1ERT-B3M/B1-XX-IC OTS-1HDR1ERT-B3/B2-XX-IC OTS-1HDR1ERT-B3D/B2-XX-IC OTS-1HDR1ERT-B3H/B2-XX-IC OTS-1HDR1ERT-L4/L4-XX-IC OTS-1HDR2DTR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 1.5 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological Test Code Nominal Bit Rate Bit error rate Connector Data Standard Data Rate Connector Optiva™ Configurable SMPTE 292 & 259 RP-178 1.485 Gbps; 270 Mbps 10-14 BNC (IEC 60169-8 Gold Plated) Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration