OTS-2DA Optiva Standard, 2 Stereo AES/EBU Digital Audio ™ Digital Audio Transmission The OTS-2DA provides for the transmission of 2 Channels of Stereo AES/EBU Digital Audio, at absolute broadcast quality. Video Audio Data System Design AES/EBU Audio In All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. AES/EBU Audio Out A L E R T S T A T U S A L E R T S T A T U S ST, LC, SC or FC ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-2DAT OTS-2DAR Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Features • Stereo AES/EBU Digital Audio over one fiber • TDM - Single Wavelength Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 10 Mbps. • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications Versions Available* Wavelength (nm) & Fiber Transmit** Receive** 1310 Multimode 1310 Singlemode 1310 Singlemode (D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) OTS-2DAT-A1-XX-IC OTS-2DAT-A2-XX-IC OTS-2DAT-A2D-XX-IC OTS-2DAT-A3-XX-IC OTS-2DAT-A3D-XX-IC OTS-2DAT-L4-XX-IC OTS-2DAR-A1-XX-IC OTS-2DAR-A2-XX-IC OTS-2DAR-A2D-XX-IC OTS-2DAR-A3-XX-IC OTS-2DAR-A3D-XX-IC OTS-2DAR-L4-XX-IC Non-Optical Version OTS-2DAT-NOC-IC OTS-2DAR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 7 12 17 25 Varies 3 10 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm; "ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z. * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Audio/FSK/Intercom Audio Digital Format Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable AES/EBU AES3-1992 (ANSI S4,40) SMPTE 276M Micro DB25 Communication Platform Network Management SDI & HD-SDI Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 11 oz Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) 1 Amp Max per Insert Card Less than 10ms CATV/RF & L-Band Optical Switching, Routing & Redundancy LED Status Indication Passive Multiplexing Solutions Compatible with OptivaView™ SNMP Management Suite Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration OTS-2DA 2 - AES/EBU - Stereo OTS-2DA 2 - AES/EBU - Stereo