Oscilent Corporation | 282 Page 1 of 3 SMD Quartz Crystal Series Number Package Description Last Modified 282 7X5 SMD 2 Pad Jan. 01 2002 . FEATURES - Seam welded metal lid / ceramic package - 1.7mm max. low profile - Tight stability / High reliability - Wide frequency range - Tape and Reel .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range fO CHARACTERISTICS UNITS 9.80 ~ 100.00 MHz @ 25ºC ±30, ±15*, ±25, ±50 PPM Ta = 0 +70ºC ±50, ±25, ±30*, ±100 PPM Operating Temperature TOPR -0 ~ +70 (Std.) / Extended Options Avail. ºC Storage Temperature TSTG -40 ~ +85 ºC Shunt Capacitance CO 5.0 max. pF Load Capacitance CL (Customer Specified) 20 (Std.) Series Resonance and others Avail. pF 9.80 ~ 100.00 MHz. 0.5 max. µW @ 25ºC ±5 PPM/Y @ 100 VDC 500 min. Mohms Frequency Tolerance Frequency Stability Drive Level Aging Insulation Resistance *±15ppm Tolerance with ±30ppm Stability available in AT Cut Only .. EQUIVALENT SERIES RESISTANCE / MODE OF OSCILLATION .. FREQUENCY RANGE (MHz) MODE MAX ESR Ohm FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 9.800 ~ 15.999 Fundamental 60 16.000 ~ 34.999 3rd O/T 60 16.000 ~ 42.000 Fundamental 40 35.000 ~ 100.000 5th O/T 60 Oscilent Corporation | 282 Page 2 of 3 . PART NUMBER GUIDE Series Number 282 Oscilent 7 x5 SMD 2 Pad Load Capacitance Frequency - 12.0M - SR See table below for standard freq. and enter here e.g. 12.048M for 12.048 MHz OR enter any desire frequency. Tolerance Over Temp ( oC ) Tolerance @ +25oC - 50 Enter desired capacitance here. See table below for standard load capacitance e.g. 20 for 20pF or Enter SR for Series. Blank * = 15 = 25 = 50 = Operating Temp ( oC ) N ±30 PPM ±15 PPM ±25 PPM ±50 PPM Blank* E= G= N= Packaging** U = ±50 PPM ±25 PPM ±30 PPM ±100 PPM U= S= W= - TR 0~+70 -20~+70 -40~+85 Blank* = Bulk TR = Tape/Reel NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) LOAD (pF) Series 12 13 16 17 18 20 30 9.8304 Std. --------- --------- --------- --------- - Std. --------- 10.000 Std. - - - - - - - 11.0592 Std. - - - - - Std. - 12.000 Std. - - - - - - - 14.31818 Std. - - - - - Std. - 16.000 Std. - - - - - - - 18.432 Std. - - - - - - - 19.6608 Std. - - - - - - - 20.000 Std. - - - - - Std. - 24.000(F) Std. - - - - - Std. - 24.00014 (F) Std. - - - - - - - 30.000 (F) Std. - - - - - - - 30.000 (OT) Std. - - - - - - - 32.000 (F) Std. - - - - - - - Oscilent Corporation | 282 Page 3 of 3 32.000 (OT) Std. - - - - - - - 33.000 (OT) Std. - - - - - - - 33.8688 (F) - - - - - - - - 35.2512(OT) Std. - - - - - - - 36.000 (F) Std. - - - - - - - 36.000 (OT) Std. - - - - - - - 40.000 (F) Std. - - - - - - - 40.00 (OT) Std. - - - - - - - 40.32 (F) Std. - - - - - - - 40.32 (OT) Std. - - - - - - - Series 12 13 16 17 18 20 30 FREQUENCY (MHz) LOAD (pF) F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. Please consult Oscilent for part numbers. Series No.: 282 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map