Oscilent Corporation | 274 Page 1 of 3 SMD Quartz Crystal Series Number Package Description Last Modified 274 7 X 5 Seam Welded SMD Quartz Crystal Jan. 02 2005 . FEATURES - Seam welded metal lid / ceramic package - 1.3mm max. low profile - Tight stability / High reliability - Wide frequency range - Tape and Reel - RoHs / Lead Free compliant . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range fO CHARACTERISTICS UNITS 6.00 ~ 80.00 MHz @ 25ºC ±10 ~ ±50 PPM Ta = -10 +70ºC ±10 ~ ±100 PPM Operating Temperature TOPR -10 ~ +60 ºC Storage Temperature TSTG -40 ~ +85 ºC Shunt Capacitance CO 7.0 max. pF Load Capacitance CL (Customer Specified) 16, 20, 30, Series pF 6.00 ~ 80.00 MHz. 0.01 ~ 1000 µW Frequency Tolerance Frequency Stability Drive Level . EQUIVALENT SERIES RESISTANCE / MODE OF OSCILLATION . . FREQUENCY RANGE (MHz) MODE MAX ESR Ohm FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 6.00 ~ 11.999 Fundamental 70 20.100 ~ 33.000 Fundamental 40 12.000 ~ 20.000 Fundamental 50 34.000 ~ 80.000 3rd O/T 80 Oscilent Corporation | 274 Page 2 of 3 PART NUMBER GUIDE Series Number 274 Oscilent 7 x5 SMD Load Capacitance Frequency - 12.0M See table below for standard freq. and enter here e.g. 2.048M for 2.048 MHz OR enter any desire frequency. Tolerance Over Temp ( oC ) Tolerance @ +25oC - SR - 05 Enter desired capacitance here. See table below for standard load capacitance e.g. 20 for 20pF or Enter SR for Series. Blank * = ±30 PPM or Fill in E.G 05 = ±5 PPM 25 = ±25 PPM Avail. = ±5 ~ ±100 Operating Temp ( oC ) G Blank* G= H= L= N= Packaging** R = ±50 PPM ±30 PPM ±20 PPM ±10 PPM ±100 PPM P= R= S= T= W= - TR 0~+50 -10~+60 -20~+70 -30~+80 -40~+85 Blank* = Bulk TR = Tape/Reel NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) LOAD (pF) Series 12 13 16 17 18 20 30 9.8304 Std. --------- --------- --------- --------- - Std. --------- 10.000 Std. - - - - - - - 11.0592 Std. - - - - - Std. - 12.000 Std. - - - - - - - 14.31818 Std. - - - - - Std. - 16.000 Std. - - - - - - - 18.432 Std. - - - - - - - 19.6608 Std. - - - - - - - 20.000 Std. - - - - - Std. - 24.000(F) Std. - - - - - Std. - 24.00014 (F) Std. - - - - - - - 30.000 (F) Std. - - - - - - - 30.000 (OT) Std. - - - - - - - 32.000 (F) Std. - - - - - - - 32.000 (OT) Std. - - - - - - - 33.000 (OT) Std. - - - - - - - 33.8688 (F) - - - - - - - - 35.2512(OT) Std. - - - - - - - 36.000 (F) Std. - - - - - - - 36.000 (OT) Std. - - - - - - - 40.000 (F) Std. - - - - - - - 40.00 (OT) Std. - - - - - - - 40.32 (F) Std. - - - - - - - 40.32 (OT) Std. - - - - - - - Series 12 13 16 17 18 20 30 FREQUENCY Oscilent Corporation | 274 (MHz) Page 3 of 3 LOAD (pF) F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. Please consult Oscilent for part numbers. Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Series No.: 274