Oscilent Corporation | 340 Series Crystal Oscillator Page 1 of 3 Crystal Oscillator Series Number Package Description Last Modified 340 Metal Dip Full UM-1 Clock Oscillators July 01 2005 FEATURES - HCMOS/TTL logic compatible - Gullwing option - Low power consumption - 3.3V or 5.0V optional - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CONDITIONS CHARACTERISTICS UNITS Output Logic - HCMOS / TTL Output - Input Voltage (VDD) - 3.3 ±10% 5.0 ±10% VDC Frequency Range (fO) - 1.544 ~ 125.000 1.544 ~ 125.000 MHz Operating Temperature (TOPR) - 0 ~ +70 (Std.) / -40 ~ 85 (Option) °C Storage Temperature (TSTG) - -55 ~ +125 °C a+b+c+d ±20, ±25, ±50, ±100 max. PPM Frequency Stability Input Current (IDD) (a) Frequency Tolerance Inclusive of Overall Stability - (b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) - (c) Input Voltage Stability Inclusive of Overall Stability (VDD ±5%) - (d) Load Stability Inclusive of Overall Stability (RL ±5%) - - 10 ~ 45 max. 15 ~ 85 max. mA @ 25°C ±1 max. PPM/Y Rise Time (TR) / Fall Time (TF) < 66.660 MHz 10 max. (0.4V to 2.4V w/ TTL, Waveform / HCMOS) nS Rise Time (TR) / Fall Time (TF) 66.660 MHz 4 max. (0.4V to 2.4V w/ TTL, Waveform / HCMOS) nS TTL Load 2.4 min. Aging Output Voltage High "1" VOH HCMOS Load 2.7 min. VDD-0.5 min. VDC TTL Load 0.4 max. HCMOS Load 0.5 max. Duty Cycle - 50 ±10 (Std.) / 50 ±5 (Option) % Start-Up Time (TS) - 10 max. ms (One Sigma) ±25 max. ps Output Voltage Low "0" VOL Jitter PIN CONNECTIONS #1 No Connection or Tri-State VDC Oscilent Corporation | 340 Series Crystal Oscillator Page 2 of 3 Enable High #7 Case Ground #8 Output #14 Vdd PART NUMBER GUIDE Series Number 340 Oscilent Double Sealed Oscillators Frequency Voltage Supply Option - 1.8432 M -5 Enter your desired 5 = 5VDC frequency e.g. 3 =3.3VDC 12.0M = 12.000MHz See table below for standard frequencies. Frequency Tolerance & Stability (max.) Operating Temp. (°C) E D= E= F= G= H= N ±100 PPM ±50 PPM ±25 PPM ±20 PPM ±10 PPM Blank* = 0~+70 N = -40~+85 Duty Cycle -T Blank*= 50±10% T = 50±5% Pin 1 Connection TS NC = No Connnection TS = Tri-State Enable High Gullwing G Blank* = Std. G = Gullwing NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard Tube Packaging; Add -TR for Tape/Reel. Click here for tape/reel specifications STANDARD OSCILLATOR FREQUENCIES - GUIDE ONLY / OTHER FREQUENCIES AVAILABLE FREQUENCY (1.8432 - 9.8304MHz) FREQUENCY (10.00 - 24.000MHz) FREQUENCY (24.576 - 80.000MHz) - 10.00 24.576 - 11.0592 25.000 1.8432 12.000 25.175 2.000 12.288 28.322 2.4576 12.800 30.000 3.579545 14.31818 32.000 3.6864 14.7456 32.514 4.000 15.9744 33.000 4.9152 16.000 35.000 5.000 16.257 40.000 5.0688 16.384 48.000 6.000 17.734475 50.000 6.144 18.000 64.000 Oscilent Corporation | 340 Series Crystal Oscillator Page 3 of 3 7.3728 18.432 65.000 8.000 19.6608 66.666 9.216 20.000 80.000 9.8304 24.000 - NOTE: Other frequencies available. PLEASE SPECIFY IN PART NUMBER GUIDE Series No.: 340 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map