Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator Page 1 of 3 SMD Oscillators Series Number Package Description Last Modified 480 Plastic Programmable HCMOS / TTL Output Jan. 01 2007 FEATURES - Programmable - Extended temperature range capabilities - Tape and Reel - Tri-State enable / disable - 5V or 3.3V optional - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CONDITIONS CHARACTERISTICS Output Logic - HCMOS / TTL Output Input Voltage (VDD) - 3.3 ±10% 5.0 ±10% VDC Frequency Range (fO) - 1.000 ~ 125.000 1.000 ~ 160.000 MHz Operating Temperature (TOPR) - 0 ~ +70 (Std.) / -40 ~ 85 (Option) °C Storage Temperature (TSTG) - -55 ~ +125 °C Frequency Stability Input Current (IDD) UNITS - a+b+c+d ±50, ±100 max. PPM (a) Frequency Tolerance Inclusive of Overall Stability - (b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) - (c) Input Voltage Stability Inclusive of Overall Stability (VDD ±10%) - (d) Load Stability Inclusive of Overall Stability (RL ±5%) - - 28 max. 45 max. mA @ 25°C ±5 max. PPM/Y Rise Time (TR) - 4 max. (0.4V to 2.4V w/ TTL, 20% ~ 80%/ HCMOS) nS Fall Time (TF) - 4 max. (0.4V to 2.4V w/ TTL, 20% ~ 80%/ HCMOS) nS Aging Output Voltage High "1" VOH TTL Load HCMOS Load 2.4 min. 2.7 min. VDD-0.5 min. VDC TTL Load 0.4 max. HCMOS Load 0.5 max. Duty Cycle - 50 ±10 (Std.) / 50 ±5 (Option) % Start-Up Time (TS) - 10 max. mS (One Sigma) ±50 max. ps Output Voltage Low "0" VOL Jitter VDC Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator Page 2 of 3 PIN CONNECTIONS #1 Tri-State Enable High #2 Case Ground #3 Output #4 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (° C) Duty Cycle Pin 1 Connection 480 - 8.0 M -3 E N -T TS Oscilent SMD Oscillators Enter your freq. e.g. 8.0M = 8.00 MHz See table below for standard freq. 5 = 5VDC 3 = 3.3VDC D= E= ±100 PPM ±50 PPM Blank* = 0~+70 N = -40~+85 Blank*= 50±10% T = -50±5% NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications PART NUMBER CODING - STANDARD OSCILLATOR FREQUENCIES FREQUENCY (1.8432 - 16.000MHz) FREQUENCY (16.257 - 80.00MHz) 1.8432 16.257 2.000 16.384 2.4576 17.734475 3.579545 18.000 3.6864 18.432 4.000 19.6608 4.9152 20.000 TS = Tri-State Enable High Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator 5.000 24.000 5.0688 24.576 6.000 25.000 6.144 25.175 7.3728 28.322 8.000 30.000 9.216 32.000 9.8304 32.514 10.000 33.000 11.0592 35.000 12.000 40.000 12.288 48.000 12.800 50.000 14.31818 64.000 14.7456 65.000 15.9744 66.666 16.000 80.000 Page 3 of 3 NOTE: Other frequencies available. Please consult Oscilent for part numbers Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Series No.: 480