Oscilent Corporation | 501 - 504 Series TCXO - Temperature Compensated Crystal Oscill... Page 1 of 2 TXCO Series Number Package Description Last Modified 501 ~ 504 5 Leads DIP HCMOS / TTL / Clipped Sine Jan. 01 2007 FEATURES - High stable output over wide temperature range - Industry standard 5 Lead - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CONDITIONS 501 502 503 504 Output - TTL HCMOS Clipped Sine Compatible* - Frequency Range fo 1.20 ~ 100.00 9.60 ~ 35.00 1.20 ~ 100.0 MHz Load 10TTL Load or 15pF HCMOS Load Max. 10K ohm // 10pF - - 1.0 Vp-p min. - - Output High 2.4 VDC min. VDD -0.5 VDC min. Low 0.4 VDC max. 0.5 VDC max. Level Frequency Stability UNITS Vs. Temp Range See Table 1 - Vs. Input Voltage (5%) ±0.5 max. PPM Vs. Load ±0.3 max. PPM Vs. Aging (@+25°C) ±1.0 per year PPM Voltage +5.0 ±5% / +3.3 ±5% VDC Input Current 20 max. / 40 max. 3 max. - - Rise Time / Fall Time - 10 max. - - nS Duty Cycle - 50 ±10% max. - - - Storage Temperature Voltage Control Range ±3.0 min. mA Frequency Adjustment PPM (TSTG) -40 ~ +85 °C - 2.5 VDC ±2.0 Positive Transfer Characteristic - *Compatible (504 Series) meets TTL and HCMOS mode simultaneously TABLE 1 - FREQUENCY STABILITY - TEMPERATURE TOLERANCE Frequency Stability (PPM) P/N Code Temperature Range 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 A 0 ~ +50°C x x x x x x x x B -10 ~ +60°C x x x x x x x x C -10 ~ +70°C O x x x x x x x D -20 ~ +70°C O x x x x x x x E -30 ~ +60°C - O x x x x x x F -30 ~ +70°C - O x x x x x x G -30 ~ +75°C - - x x x x x x x available all Frequency O avail up to 25MHz only Oscilent Corporation | 501 - 504 Series TCXO - Temperature Compensated Crystal Oscill... Page 2 of 2 H -40 ~ +80°C - - - - x x x x *Other Temperature and Frequency Stabilities may be available. Check with Oscilent for details. PIN CONNECTIONS #1 VCC #2 OUTPUT #3 V.C. or GND #4 GND #5 GND PART NUMBER GUIDE Series Number 502 Oscilent 501 = TTL 502 = HCMOS 503 = Clipped Sine Wave 504 = Compatible Frequency - 4.0 M Enter your desired frequency e.g. 12.0M = 12.000MHz Voltage Supply Option Frequency Stability (max.) -3 5 = 5VDC 3 = 3.3VDC Operating Temp. (°C) 45 15 = 20 = 25 = 30 = 35 = 40 = 45 = 50 = ±1.5 PPM ±2.0 PPM ±2.5 PPM ±3.0 PPM ±3.5 PPM ±4.0 PPM ±4.5 PPM ±5.0 PPM Frequency Deviation D A= B= C= D= E= F= G= H= 0 ~ +50 -10 ~ +60 -10 ~ +70 -20 ~ +70 -30 ~ +60 -30 ~ +70 -30 ~ +75 -40 ~ +80 -5 NC = No Connection (TCXO) 05 = ±5 PPM min. 10 = ±10 PPM min. NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 501 to 504