Oscilent Corporation | 515 - 518 Series TCXO - Temperature Compensated Crystal Oscill... Page 1 of 2 TXCO Series Number Package Description Last Modified 515 ~ 518 14 Pin DIP HCMOS / TTL / Clipped Sine Jan. 01 2007 FEATURES - High stable output over wide temperature range - Industry standard DIP 14 pin lead spacing - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CONDITIONS 515 516 517 518 Output - TTL HCMOS Clipped Sine Compatible* - Frequency Range fo 1.20 ~ 100.0 9.60 ~ 35.0 1.20 ~ 100.0 MHz Load 10TTL Load or 15pF HCMOS Load Max. 10K ohm // 10pF - - 1.0 Vp-p min. - - Output High 2.4 VDC min. VDD -0.5 VDC min. Low 0.4 VDC max. 0.5 VDC max. Level Frequency Stability UNITS Vs. Temp Range See Table 1 - Vs. Input Voltage (5%) ±0.5 max. PPM Vs. Load ±0.3 max. PPM Vs. Aging (@+25°C) ±1.0 per year PPM Voltage +5.0 ±5% / +3.3 ±5% VDC Input Current 20 max. / 40 max. 3 max. - ±3.0 min. mA Frequency Adjustment - Rise Time / Fall Time - 10 max. - - nS Duty Cycle - 50 ±10% max. - - - (TSTG) Storage Temperature PPM -40 ~ +85 °C *Compatible (518 Series) meets TTL and HCMOS mode simultaneously TABLE 1 - FREQUENCY STABILITY - TEMPERATURE TOLERANCE Frequency Stability (PPM) P/N Code Temperature Range 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 A 0 ~ +50°C x x x x x x x x B -10 ~ +60°C -x x x x x x x x C -10 ~ +70°C O x x x x x x x D -20 ~ +70°C O x x x x x x x E -30 ~ +60°C - O x x x x x x F -30 ~ +70°C - O x x x x x x G -30 ~ +75°C - - x x x x x x - - - - x x x x H x available all Frequency O avail up to 25MHz only Oscilent Corporation | 515 - 518 Series TCXO - Temperature Compensated Crystal Oscill... Page 2 of 2 -40 ~ +80°C PART NUMBER GUIDE Series Number 515 Oscilent 515 = TTL 516 = HCMOS 517 = Clipped Sine Wave 518 = Compatible Frequency Voltage Supply Option Frequency Stability (max.) Operating Temp. (°C) Frequency Deviation - 4.0 M -3 45 A - NC Enter your desired frequency e.g. 12.0M = 12.000MHz 5 = 5VDC 3 = 3.3VDC 15 = 20 = 25 = 30 = 35 = 40 = 45 = 50 = ±1.5 PPM ±2.0 PPM ±2.5 PPM ±3.0 PPM ±3.5 PPM ±4.0 PPM ±4.5 PPM ±5.0 PPM A= B= C= D= E= F= G= H= 0 ~ +50 -10 ~ +60 -10 ~ +70 -20 ~ +70 -30 ~ +60 -30 ~ +70 -30 ~ +75 -40 ~ +80 NC = No Connection (TCXO) NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 515 to 518