EGL341A thru EGL341J SURFACE MOUNT GLASS PASSIVATED SUPER FAST SWITCHING RECTIFIER DO-213AA / MINI MELF SOLDERABLE ENDS CATHODE BAND D1= 0.066(1.676) 0.060(1.524) D2 0.022(0.559) 0.016(0.406) 0.145(3.683) 0.131(3.327) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES MECHANICAL DATA Ldeal for surface mounted applications Low leakage current Glass passivated chips Fast switching High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths Case Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method208 Polarity Color band on body denotes cathode Mounting position Any Weight 0.036gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temp. unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL EGL 341A EGL 341B EGL 341C EGL 341D EGL 341F EGL 341G EGL 341J UNITS Maximum Current Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 600 Volts 0 Maximum Average Forward Rectified Current TT=55 C I(AV) 1.0 Amps Peak Forward Surge Current Single Sine-Wave on Rated Load (JEDEC Method) IFSM 10 Amps Maximum Instantaneous Forward Voltage Drop at 1.0A DC VF Maximum DC Reverse Current @TA=250C at Rated DC Blocking Voltage @TA=1250C IR 5 100 Maximum Reverse Recovery Time, Test Conditions IF=0.5A, IR=1.0A, IRR=0.25A TRR 35 nS Typical Junction Capacitance CJ 15 pF TJ TSTG -55 to +150 Operating Junction and Storage Temperature Range www.paceleader.com.tw 1.05 1 1.3 1.75 Volts A 0 C EGL341A thru EGL341J SURFACE MOUNT GLASS PASSIVATED SUPER FAST SWITCHING RECTIFIER RATING AND CHARACTERISTICS CURVES EGL341A THRU EGL341J FIG. 2 - MAXIMUM NON - REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) l FSM (A) AVERAGE FORWARD CURRENT. (A) l F(AV) (A) FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIER CURRENT 1.2 RESISTIVE OR INDUCTIVE LOAD 1.0 0.8 0.6 0.4 0.2 0.2*0.2"(5.0*5.0mm) COPPER PAD AREAS 0 0 20 40 60 80 100 120 140 160 o Ta( C) Tamb, ambient temperature (oC) 12 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 8.0 6.0 4.0 2.0 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 3 -TYPICAL JUNCTION CAPACITANCE 100 10 EGL341A---EGL341D INSTANTANEOUS FORWARD CURRENT. (A) l F(A) JUNCTION CAPACITANCE. (pF) EGL341J 1 o T J =25 C 10 0.1 o TJ=25 C PULSE WIDTH=300 1% DUTY CYCLE s 0.01 1 1 10 EGL341F---EGL341G 100 ¤Ï¦V¹qÀ£ REVERSE VOLTAGE. (V) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 ¦ V ¹ q À £ V F(V) INSTANTANEOUS FORWARD VOLTAGE. (V) FIG. 5 ( ) FIG. 5 - TYPICAL REVERSE CHARACTERISTICS 100 o T J =150 C INSTANTANEOUS REVERSE CURRENT. (mA) 10 o T J =125 C T J =100 oC 1 o T J =25 C 0.1 0.01 0 20 40 60 ¦V¹qÀ£ PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) www.paceleader.com.tw 2 80 100