KMB12F thru KMB110F Schottky Surface Mount Flat Bridge Rectifier VOLTAGE - 20 TO 100 VOLTS CURRENT - 1.0 AMPERES Major Ratings and Characteristics 1.0 A IF(AV) 20 V to 100 V VRRM 30 A IFSM 0.50 V, 0.55V,0.70 V, 0.85V VF 125 °C Tj max. FEATURES ● ● ● ● ● ● ● ● Low profile package Ideal for automated placement Ultrafast reverse recovery time Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC MECHANICAL DATA ● ● ● Case: MBF molded plastic body over Schottky barrier chips Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Polarity symbols marked on body MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) Symbol KMB12F KMB14F KMB16F KMB18F KMB110F UNIT Maximum repetitive peak reverse voltage VRRM 20 40 60 80 100 V Maximum RMS voltage VRMS 14 28 42 56 70 V Maximum DC blocking voltage VDC 20 40 60 80 100 V Maximum average forward rectified current 0.2×0.2"(5.0×5.0mm)copper pad area Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Maximum instantaneous forwad voltage at 1.0A Maximum DC reverse current TA = 25 ℃ at Rated DC blocking voltage TA = 100℃ Typical Junction Capacitance at 4.0V,1.0MHz Typical Thermal resistance (Note1) Operating junction temperature range Storage temperature range IF(AV) 1.0 A IFSM 30 A VF 0.50 0.55 0.85 0.5 20 IR CJ 0.70 250 mA 125 pF RθJA RθJL 85 20 ℃/ W TJ –55 to +125 ℃ TSTG – 55 to +150 ℃ Note：1.Thermal resistance from junction to ambient and from junction to lead P.C.B.mounted on 0.2×0.2"(5.0×5.0mm)copper pad areas. www.paceleader.tw V 1 KMB12F thru KMB110F Schottky Surface Mount Flat Bridge Rectifier VOLTAGE - 20 TO 100 VOLTS CURRENT - 1.0 AMPERES Characteristic Curves (TA=25 ℃ unless otherwise noted) www.paceleader.tw 2