S1AB thru S1MB SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMB/DO-214AA .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .002(.051) .008(.203) .030(0.76) .050(1.27) .200(5.08) .220(5.59) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA For surface mount applications Glass passivated junction Low profile package High current capability Easy pick and place High surge current capability Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 250oC/10 seconds at terminsls Case JEDEC DO-214AA molded plastic Terminals Pure tin plated, lead free Polarity Indicated by cathode band Package 12mm tape EIA STD RS-481 Weight 0.093gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% UNITS SYMBOL S1AB S1BB S1DB S1GB S1JB S1KB S1MB Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Current at TL =1100C I(AV) 1.0 Amps Peak Forward Surge Current 8.3mm Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneous Forward Voltage at 1.0A VF 1.1 Volts IR 5 50 A CJ 12 JL 30 0 Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1250C Typical Junction Capacitance (NOTE 1) Maximum Thermal Resistance (NOTE 2) R Operating and Storage Temperature Range TJ TSTG -55 to +150 NOTES 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 2. Measured on P.C.B. Board with 0.27 x0.27 (7.0x7.0mm) copper pad areas www.paceleader.tw 1 Volts pF 0 C/W 0 C S1AB thru S1MB SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES S1AB THRU S1MB www.paceleader.tw 2