PACELEADER RS2BA

RS2AA thru RS2MA
SURFACE MOUNT FAST RECOVERY RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS
CURRENT - 2.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.078(2.00)
.096(2.44)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
MECHANICAL DATA
For surface mount applications
Glass passivated junction chip
Buit-in strain relief, ideal for automated placement
Plastic material used carries Underwriters
Laboratory Classification 94V-0
Fast switching for high efficiency
High temperature soldering 260oC/10seconds at terminals
Case JEDEC DO-214AC molded plastic
Terminals Pure tin plated, Lead free.
Polarity Indicated by cathode band
Standard packaging 12mm tape EIA STD RS-481
Weight 0.064grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL RS2AA RS2BA RS2DA RS2GA RS2JA
RS2KA RS2MA
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Maximum Average Forward Rectified Current @ TL =1000C
I(AV)
2.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
50
Amps
Maximum Instantaneoue Forward Voltage at 2.0A
VF
1.3
Volts
Maximum DC Reverse Current @TA=25 C
at Rated DC Blocking Voltage @TA=1250C
IR
5.0
200
A
Maximum Reverse Recovery Time (NOTE 1) TJ=250C
TRR
Typical Junction Capacitance (NOTE 2)
CJ
0
Maximum Thermal Resistance (NOTE 3)
R
R
Operating and Storage Temperature Range
TJ
TSTG
150
250
Volts
500
nS
pF
50
55
18
JA
JL
0
C/W
-55 to +150
NOTES
1. Rverse Recovery Test Condibons IF = 0.5A, I R = 1.0A, l RR = 0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. Thermal Resistance from Junction to Ambient and Junction to Lead Mounted on P.C.B. with 0.2"X0.2" (0.5X0.5mm) copper Pad Areas
www.paceleader.tw
1
0
C
RS2AA thru RS2MA
SURFACE MOUNT FAST RECOVERY RECTIFIER
RATING AND CHARACTERISTICS CURVES RS2AA THRU RS2MA
www.paceleader.tw
2