14 Pin Delay Line ELECTRONICS INC. EPA2782G-3A & EPA2782G-3A-RC Schematic 13 Input 2 12 3 11 5 10 6 9 Output 1 7 14 Ground 8 Ground Pin #4 Not Connected Electrical Parameters @ 25°C Impedance (Ω ± 10%) Tap Delay (nS ± 0.4 nS) Total Delay (nS ± 1.0 nS) TR Output (ns Max.) Attenuation (dB Max) 500 1.0 10 3.5 1.0 Recommended Operating Conditions PW* D* TA Pulse Width of Total Delay Duty Cycle Operating Free Air Temperature DC Electrical Characteristics Distortion Temperature Coefficient of Delay Insulation Resistance @ 100 Vdc Dielectric Strength Min. Max. Unit 200 --0 --40 +70 % % C° Min. Max. Unit ----1000 --- ± 10 100 --100 % PPM/°C Meg Ω Vdc Input Pulse Test Conditions @ 25° C VIN PW TRI PRR Package .770 (19.56) Pin 1 I.D. 1.2 30 2.0 100 Volts nS nS KHz .410 (10.41) Pad Layout .040 (1.02) .020 (.508) .005/.015 (.127/.381) 0°-8° .050 (1.27) .020 (.508) Notes : 1. Lead Finish EPA2782G-RC SnPb Hot Tin Dip (Sn) † 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight .300 (7.62) .100 (2.54) EPA2782G 2. Peak Temperature Rating (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) .270 (6.86) .600 (15.24) Unit Pulse Input Voltage Pulse Width Pulse Rise Time (10-90%) Pulse Repetition Rate PCA EPA2782G-3A(-RC) Date Code .210 (5.33) .090 (2.29) .100 (2.54) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) TBD grams TBD grams TBD pieces/tube TBD pieces/13” reel TBD pieces/tube TBD pieces/13” reel (*EPA2782GTR) (*EPA2782GTR-RC) † Lead Material : Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSA2782G-3A & -RC Rev. B 11/6/06 RR TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com