RADSL CP Transformer EPB5094G ELECTRONICS INC. • Designed to meet Supplementary Insulation Requirement • of IEC950 for 250 VAC Working Voltage • Excellent THD Characteristic • • Isolation : 2000Vrms • Electrical Parameters @ 25° C Sec. OCL (uH ± 10%) Leakage Inductance (µH Max.) Interwinding Capacitance (pF Max.) Insertion Loss (dB Max.) Total Harmonic Distortion (dB Max.) Longitudinal Balance (dB Min.) @ 100 KHz, @ 100 KHz, 0.1 Vrms 0.1 Vrms 437 27.5 @ 100 KHz, 0.1 Vrms @ 100 KHz, 0.1 Vrms 20 35 KHz to 1.0 MHz -0.5 Pins 10-6 to 1-5 w/ 7, 9 & 4, 2 shorted @100 KHz, 15 V p-p -90 Pins 10-6 w/ 7, 9 shorted 35 KHz to 650 KHz -60 Pins 1-4 to 10-6 w/ 7, 9 shorted Pri. OCL (uH ± 10%) Pins 1-4 Pins 10-6 w/ 7, 9 shorted 1 4 Pins 2-5 Pins 1-4 w/ 2-5 open, w/ 1-4 open, 6,7,9,10 6,7,9,10 shorted shorted Pins 1-4 to 10-6 w/ 7, 9 shorted Pins 2-5 to 10-6 w/ 7, 9 shorted Turns Ratio (Pri.:Sec. ±1%) 1:4 1:2 1-4:10-6 2-5:10-6 w/ 7, 9 w/ 7, 9 shorted shorted • Secondary Wdg. Impedance : 100 Ω • DCR : 0.5 Ω @ Pins 1-4, 1.0 Ω @ Pins 2-5, 2.0 Ω @ Pins 10-6 w/ 7, 9 shorted • • DC Unbalanced Current : 2.0 mA @ Pins 1-5 w/ 2, 4 shorted • Schematic Pri. Package A Driver Side N Marking: PCA EPB5094G D.C. B Q Sec. 1 10 4 7 2 Line 9 Side 5 6 P Pin 1 I.D. Dimensions F H C M K D E L I G PCA ELECTRONICS, INC. 6799 SCHOENBORN ST. NORTH HILLS, CA 91343 CSB5094G Rev. - Dim. Min. A B C D E F G H I K L M N P Q .490 .506 .460 .395 .005 .095 .665 .026 .010 0° .029 --------- (Inches) Max. Nom. .530 .516 .480 .405 .015 .105 .675 .030 .014 8° .049 --------- .512 .510 .470 .400 .010 .100 .670 .028 .012 --.039 .051 .098 .100 .700 2/25/00 Product performance is limited to specified parameters. Data is subject to change without prior notice. (Millimeters) Min. Max. Nom. 12.45 12.85 11.68 10.03 .127 2.41 16.89 .660 .254 0° .737 --------- 13.46 13.11 12.19 10.29 .381 2.67 17.15 .762 .356 8° 1.25 --------- 13.00 12.95 11.94 10.16 .254 2.54 17.02 .711 .305 --.991 1.29 .249 2.54 17.78 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com