10/100 LAN Interface Module with Common Mode Termination ELECTRONICS INC. EPF8097G • Optimized for DP83840A/DP83223 Chip Set • • Recommended for use with ICS 1890 Series SS578Q2120 • and National Semiconductor chip when connected per appropriate schematic • Guaranteed to operate with 8 mA DC bias at 70°C • • Complies with or exceeds IEEE 802.3, 10 BT/100 BX Standards • Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C 1-80 MHz 100 KHz, 0.1 Vrms 8 mA DC Bias Return Loss (dB Min.) 80-100 MHz 100-150 MHz 1-30 MHz Common Mode Rejection (dB Min.) 30-60 MHz 60-100 MHz 1-30 MHz 100 MHz 200 MHz Crosstalk (dB Min.) [Between Channels] 5-10 MHz 10-100 MHz -35 -35 Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Cable Side 350µH -1 -1 -2 • -2 -3.5 -3 -18 Isolation : 1500 Vrms • -18 -12 -12 -10 -10 -38 -38 -35 -30 Impedance : 100 Ω • Rise Time : 3.0 nS Max. -25 -25 • Schematic Receive Channel Transmit Channel RD+ 1 7 RX+ 11 TX- TD- 15 CMT RD- 2 5 CT CT 14 6 RX- TD+ 16 12 CT 10 TX+ 1:1 1:1 CT 3 Package Dimensions A J Pin 1 I.D. Dim. Min. A B C D E F G H I J K L M N P Q .970 .380 .234 .695 .005 .097 .500 .017 .008 .135 0° .025 N PCA EPF8097G Date Code B Pad Layout Q E K L H PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 P M D C F 12 CT (Inches) Max. Nom. .990 .400 .252 .705 .015 .103 .520 .022 .013 .145 8° .045 .980 .390 .244 .700 .010 .100 .510 .020 .011 .140 4° .035 .030 .100 .092 .560 (Millimeters) Min. Max. Nom. 24.64 9.65 5.94 17.65 .127 2.46 12.7 .432 .203 3.43 0° .635 25.15 10.16 6.41 17.91 .381 2.62 13.21 .559 .330 3.68 8° 1.14 24.89 9.91 6.20 17.78 .254 2.54 12.95 .508 .279 3.56 4° .889 .762 2.54 2.54 14.22 I G CSF8097G Rev. A 2/13/98 Product performance is limited to specified parameters. Data is subject to change without prior notice. TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com