10/100Base-TX Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPF8188G • Recommended for use with SSI578Q2120 Chip (when connected per appropriate schematic) • Guaranteed to operate with 8 mA DC Bias at 70°C • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk* (dB Min.) 100 KHz, 0.1 Vrms 8 mA DC Bias 1-80 MHz 80-100 MHz 150 MHz 1-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-100 MHz 100-200 MHz 200-500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -1/-1 -3.5/-3 -18/-18 -14/-14 -10/-10 -45/-45 -35/-35 -30/-20 -10/-10 • Isolation : 1500 Vrms • Impedance : 100 Ω • Rise Time : 3.0 nS Max. • Crosstalk : Between Channels 1-100 MHz -35 • Schematic Transmit Channel Chip Receive Channel 2 15 1 16 Cable 3 6 9 Chip Cable 10 7 14 1:1 11 1:1 8 Package .980 (24.89) Pin 1 I.D. .092 (2.34) .100 (2.54) .140 (3.56) PCA EPF8188G Date Code .390 (9.91) .560 (14.22) .700 (17.78) .247 Max. (6.27) Pad Layout .030 (.762) .010/.015 (.254/.381) .008/.013 (.203/.330) 0°-8° .035 (.889) .017/.022 (.432/.559) .500 (12.70) .100 (2.54) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8188G Rev. B 5/8/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com