10/100Base-TX Single Port RJ-45 Jack ELECTRONICS INC. EPJ9632E-S9-RC • Space Saving RJ-45 Connectors • UL94V-0 Rated Connector Housing • Complete Bob Smith Termination Included • Operating Temperature : -40°C to +85°C • MDI/MDI-X Compatible • 1500 Vrms Isolation • RoHS Compliant Electrical Parameters @ 25° C Turns Ratio ( ± 3% ) OCL (µH Min.) Insertion Loss (dB Max.) CMRR (dB Min.) Xmit/Rcv @100 KHz, 0.1 Vrms 8 mA DC Bias 1-65 MHz 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-50 MHz 50 -150 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1CT:1CT/1CT:1CT 350 -1.0 -20 -16 -12 -10 -30 -20 -40 -35 -30 Return Loss (dB Min.) Crosstalk (dB Min.) Schematic P8 Transmit TD+ P1 J4 J5 J7 J8 Receive RX+ J3 J1 TX+ 1000pF 2KV CT P4 TD- P2 J2 TX- 1CT:1CT 75 Ω P3 RD+ P5 CT 75 Ω RX- J6 75 Ω 75 Ω P6 RD- 1CT:1CT P12 P10 Note : Connect P8 to Analog Gnd (Chasis Gnd) P11 Green LED Yellow LED 1.00 (25.40) Package LED J8 P9 Yellow LED Marking : PCA EPJ9632E-S9-RC D.C. .335 (8.50) .630 (16.00) LED Green LED .594 .535 (15.10) (13.60) J1 .130 (3.30) .425 (10.79) .450 (11.43) .350 (8.89) 4 x Ø.050 (1.27) 8 x Ø.035 (.900) 2 x Ø.070 (1.70) 2 x Ø.126 (3.20) 11 .190 (4.83) 10 9 12 .100 (2.54) .100 (2.54) Notes : 7 5 3 1 8 6 4 2 .350 (8.89) SnCu 2. Peak Temperature Rating (Wave Solder Process Only) 260°C 3. Moisture Sensitive Levels .120 (3.05) .430 (10.92) .450 (11.43) .620 (15.75) EPJ9632E-S9-RC 1. Lead Finish MSL = 1 (72 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information 7.41 grams (Tray) 60 pieces/tray Suggested PCB Layout (Component Side) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSJ9632E-S9-RC Rev. - 7/17/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com