1000Base-T Module EPG4006F & EPG4006F-RC ELECTRONICS INC. • Complies with or exceeds IEEE 802.3 1000Base-T Standards • Guaranteed to operate with 8 mA DC Bias at 0°C to +70°C • Add “-RC” after part number for RoHS Compliant • Transfer Molded Part • 1500 Vrms Isolation Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss (dB Max.) Return Loss (dB Min.) @ 100 KHz, 0.1 Vrms 8 mA DC Bias 1-65 MHz 65-100 MHz 100-125 MHz 350 (Media Side) -1.0 -1.1 -1.5 CMRR (dB Min.) Crosstalk (dB Min.) 1-40 MHz 60 MHz 80 MHz 100 MHz 1-80 MHz 1-40 MHz 60 MHz 100 MHz -18 -15 -12 -10 -30 -40 -35 -30 • Impedance : 100 Ω • Schematic Package 1.100 (27.94) .102 (2.58) .068 (1.73) .03937 (1.00) 1CT:1CT 2, 5, 8, 11 Pin 1 I.D. PCA EPG4006F Date Code 48 Pad Layout .480 .640 (12.19) (16.26) 1 24 .9055 (23.00) 1, 4, 7, 10 48, 45, 42, 39 3, 6, 9, 12 46, 43, 40, 37 .030 (.762) 14, 17, 20, 23 .010/.015 (.254/.381) .260 (6.60) .03937 (1.00) .016/.022 (.406/.559) 47, 44, 41, 38 25 .008/.013 (.203/.330) 0°-8° 1CT:1CT 35, 32, 29, 26 13, 16, 19, 22 36, 33, 30, 27 15, 18, 21, 24 34, 31, 28, 25 Chip Side Media Side .035 (.889) .600 (15.24) Notes : EPG4006F EPG4006F-CR SnPb Hot Dipped Sn or SnCu 1. Lead Finish 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 MSL = 3 5.12 grams 5.12 grams 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 245°C 19 pieces/tube 19 pieces/tube 350 pieces/13” reel 350 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSFG4006F&-RC Rev. 5 3/25/09 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com