FEATURES • 8 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 2A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 88% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY (300KHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment SMD TYPE DESCRIPTION The FKC08 series offer 8 watts of output power from a package in an IC compatible 24pin DIP configuration. FKC08 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The FKC08 have features 1600VDC of isolation, short circuit protection and as well as five sided shielding. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 8 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Minimum load 0% Line regulation Load regulation LL to HL at Full Load No Load ± 0.2% Single (DIP) to Full Load Single (SMD) Dual (SMD,DIP) ± 0.5% ± 1% ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise ± 5% 20MHz bandwidth See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change Over load protection 200μS % of FL at nominal input Short circuit protection 150%, typ. Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation voltage See table Input to Output Input(Output) to Case Isolation resistance DIP SMD 1600VDC, min. 1600VDC, min. 1000VDC, min. 9 10 ohms, min. Isolation capacitance 300pF, max. Switching frequency 300KHz, typ. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Dimensions Weight MTBF (Note 1) Input voltage range Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 3.053 x 10 hrs 6 MIL-HDBK-217F 1.213 x 10 hrs 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Input surge voltage 100mS max Pi type 12V input 24V input 48V input 36VDC 50VDC 100VDC Input reflected ripple Nominal Vin and full load 20mAp-p current Nominal Vin and Start up time Power up 700mS, max. constant resistive load Remote ON/OFF (Note 6) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V DC-DC OFF Input current of remote control pin Nominal Vin -0.5mA ~ 0.5mA Remote off state input current Nominal Vin 2.5mA ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC to +85ºC (with derating) Maximum case temperature +100ºC Storage temperature range Thermal impedance -55ºC to +105ºC Nature convection 20ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 7) EN55022 Class A Air Contact ± 8KV ± 6KV Perf. Criteria A ESD EN61000-4-2 Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 8) EN61000-4-4 ± 2KV Perf. Criteria A Surge (Note 8) EN61000-4-5 ± 1KV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Page 1 of 3 Issued Date：2008/05/21 Model Number Input Range Output Voltage FKC08-12S33 FKC08-12S05 FKC08-12S12 FKC08-12S15 FKC08-12D05 FKC08-12D12 FKC08-12D15 FKC08-24S33 FKC08-24S05 FKC08-24S12 FKC08-24S15 FKC08-24D05 FKC08-24D12 FKC08-24D15 FKC08-48S33 FKC08-48S05 FKC08-48S12 FKC08-48S15 FKC08-48D05 FKC08-48D12 FKC08-48D15 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current Input Current Eff (4) Output (4) (3) (2) (%) Full load Min. load Full load Ripple & Noise No load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 15mA 13mA 20mA 15mA 20mA 20mA 10mA 30mA 13mA 15mA 15mA 15mA 13mA 7mA 8mA 10mA 10mA 8mA 8mA 7mA 724mA 791mA 792mA 802mA 843mA 802mA 824mA 362mA 396mA 406mA 411mA 427mA 406mA 411mA 181mA 198mA 203mA 203mA 205mA 200mA 201mA 80 83 88 87 83 87 85 80 83 86 85 82 86 85 80 83 86 86 85 87 87 Capacitor(5) Load max 3300μF 1600μF 350μF 240μF ± 1000μF ± 160μF ± 100μF 3300μF 1600μF 350μF 240μF ± 1000μF ± 160μF ± 100μF 3300μF 1600μF 350μF 240μF ± 1000μF ± 160μF ± 100μF Note 1. 2. 3. 4. 5. 6. 7. 8. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The ON/OFF control pin voltage is referenced to –Vin. The FKC08 series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend: 12Vin: 4.7μF/25V 1210 MLCC . 24Vin : N/A . 48Vin : N/A. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. Page 2 of 3 Issued Date：2008/05/21 Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: C1 FKC0812xxx FKC0824xxx 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) FKC0848xxx C2 C3 C4 L1 325μH 4.7μF/50V 1000pF/2KV 1000pF/2KV Common N/A 1812 MLCC MLCC MLCC Choke PMT-050 325μH 6.8μF/50V 1000pF/2KV 1000pF/2KV Common N/A 1812 MLCC MLCC MLCC Choke PMT-050 325μH 2.2μF/100V 2.2μF/100V 1000pF/2KV 1000pF/2KV Common 1812 MLCC 1812 MLCC MLCC MLCC Choke PMT-050 DIP PIN CONNECTION PIN SINGLE DUAL 1 2 3 CTRL - INPUT - INPUT CTRL - INPUT PIN SINGLE DUAL 23 22 + INPUT + INPUT + INPUT - INPUT 9 11 NC NC COMMON - OUTPUT 16 14 PIN SINGLE DUAL 1 2 3 CTRL - INPUT - INPUT CTRL - INPUT 9 11 Others NC NC NC + INPUT - OUTPUT COMMON + OUTPUT + OUTPUT SMD PIN CONNECTION - INPUT PIN SINGLE DUAL 23 22 + INPUT + INPUT + INPUT Recommended EN55022 Class B Filter Circuit Layout + INPUT COMMON 16 - OUTPUT COMMON - OUTPUT 14 + OUTPUT + OUTPUT NC Others NC NC Page 3 of 3 Issued Date：2008/05/21