TM Application Specific Crystal Oscillator 7.0 x 5.0mm 3.3V CMOS Low-Jitter 133.330 MHz DDR XO FNDDR1133 ASSP XO™ for Networking 7.0 x 5.0mm Ceramic SMD Package: Product Features Recommended Land Pattern: • Very low Pk to Pk jitter - 30ps Max • Low output current - 20mA Max • Low power standby mode • RoHS Compliant Product Description This is an enhanced high frequency 3.3V, 133.33MHz crystal clock oscillator with superb jitter and low operating current for DDR cache memory applications in Serial Attached SCSI RAID controller/Host Bus Adapter. Pin Functions: Applications Pin Function 1 OE Function • Serial Attached SCSI 3G/6G RAID Controller 2 Ground 3 Clock Output • Serial Attached SCSI 3G/6G Host Bus Adapter 4 V DD *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: FNDDR1133 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 10-0020 All specifications are subject to change without notice. FNDDR1133 Rev C 04/13/10 1 3.3V CMOS Low-Jitter 133.330 MHz DDR XO FNDDR1133 TM Application Specific Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Output Frequency Max. Units 133.330 Supply Voltage V DD 2.97 3.3 MHz 3.63 V Supply Current, Output Enabled 20 mA Supply Current, Output Disabled 10 µA ±50 ppm +70 °C 10% V DD V Frequency Stability Operating Temperature Range -20 Output Logic 0, VOL Output Logic 1, VOH 90% V DD See Note 1 below V Output Load 15 Duty Cycle Notes 45 pF 55 % Measured 50% V DD Rise and Fall Time 2 ns Measured 20/80% of waveform Jitter, pk-pk 30 ps 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 0.7 V DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V DD Internal Pullup Resistance 30 Notes V or open V Output is Hi-Z kΩ Output Disable Delay 200 ns Output Enable Delay 2 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 Max. Units +125 °C Notes For the latest product information visit: http://www.pericom.com/products/timing/oscillators/FNDDR1133/ For test circuit go to: http://www.pericom.com/pdf/sre/tc_hcmos.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 10-0020 All specifications are subject to change without notice. FNDDR1133 Rev C 04/13/10 2