KMB12F thru KMB110F VOLTAGE - 20 TO 100 VOLTS Major Ratings and Characteristics IF(AV) VRRM IFSM VF Tj max. ● ● ● ● ● ● ● ● CURRENT - 1.0 AMPERES 1.0 A 20 V to 100 V 30 A ° 0.50 V, 0.55V,0.70 V, 0.85V 125 C FEATURES Low profile package Ideal for automated placement Ultrafast reverse recovery time Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals MECHANICAL DATA ● Case: MBF molded plastic body over Schottky barrier chips ● ● Polarity: Polarity symbols marked on body MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) Symbol KMB12F KMB14F KMB16F KMB18F KMB110F UNIT Maximum repetitive peak reverse voltage VRRM 20 40 60 80 100 V Maximum RMS voltage VRMS 14 28 42 56 70 V Maximum DC blocking voltage VDC 20 40 60 80 100 V Maximum average forward rectified current 0.2×0.2"(5.0×5.0mm)copper pad area Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Maximum instantaneous forwad voltage at 1.0A Maximum DC reverse current TA = 25 ℃ at Rated DC blocking voltage TA = 100℃ Typical Junction Capacitance at 4.0V,1.0MHz Typical Thermal resistance (Note1) Operating junction temperature range Storage temperature range IF(AV) 1.0 A IFSM 30 A VF 0.50 0.55 0.85 0.5 20 IR CJ 0.70 250 V mA 125 pF RθJA RθJL 85 20 ℃/ W TJ –55 to +125 ℃ TSTG – 55 to +150 ℃ Note：1.Thermal resistance from junction to ambient and from junction to lead P.C.B.mounted on 0.2×0.2"(5.0×5.0mm)copper pad areas. Web Site: WWW.PS-PFS.COM KMB12F thru KMB110F VOLTAGE - 20 TO 100 VOLTS Characteristic Curves (TA=25 ℃ unless otherwise noted) Web Site: WWW.PS-PFS.COM CURRENT - 1.0 AMPERES